Ordinary Release Bearing VKC3553
The DUHUI VKC3553 ordinary release bearing is a direct replacement engineered for ISUZU GEMINI applications. This release bearing matches OE specifications including 8-94133-417 and cross-references with SKF VKC3553, LUK 500044310, and SACHS 3151866001.
Specifications
| Parameter | Value |
|---|---|
| DH Code | |
| Part Number | VKC3553 |
| Warranty | 2 years / 50,000 km |
| Type | Push-type |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code:
OE Numbers: 8-94133-417, 8-94133-417-0, 8-94133-417-1
Reference Numbers (Interchange):
SKF: VKC3553
Timken: 48TKA3211B, 48TKA3211AU3, 614108, BRG431, CB2128C
LUK: 500044310
SACHS: 3151866001
Vehicle Fitment
ISUZU: GEMINI 1.5 i 1990-1993, GEMINI (JT) 1.5 1988-1990, GEMINI Saloon 1.6 STYLUS 1990-1993
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- OE-match design for ISUZU GEMINI applications.
- Push-type release bearing configuration compatible with original clutch systems.
- Cross-references with SKF VKC3553, LUK 500044310, and SACHS 3151866001.
- Multiple OE number interchange: 8-94133-417, 8-94133-417-0, 8-94133-417-1.
- Multiple interchange numbers including 48TKA3211B, 614108, BRG431, and CB2128C.
- Factory pre-lubricated with high-temperature grease for immediate installation.
Installation Notes
- Inspect the clutch fork and pivot ball for wear before installing the new release bearing.
- Clean the input shaft sleeve thoroughly and check for scoring or burrs that could damage the bearing.
- Apply a light coat of high-temperature grease to the sleeve contact surface – avoid over-greasing.
- Torque the retaining bolts to ISUZU factory specifications for secure attachment.
- Confirm clutch slave cylinder pushrod travel is within factory range to avoid over-travel.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces release bearings to OE specifications. Contact us
