Ordinary Release Bearing VKC3617
The DUHUI VKC3617 ordinary release bearing is a direct replacement engineered for HONDA CIVIC and CONCERTO applications. This release bearing matches OE specifications including 22810-PL3-005 and cross-references with SKF VKC3617, LUK 500049060, and SACHS 3151867001.
Specifications
| Parameter | Value |
|---|---|
| DH Code | |
| Part Number | VKC3617 |
| Warranty | 2 years / 50,000 km |
| Type | Push-type |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code:
OE Numbers: 22810-PL3-005, 22810-PL3-003
Reference Numbers (Interchange):
SKF: VKC3617
Timken: 47TKB3101A, 614077, BRG427, PRB37
LUK: 500049060
SACHS: 3151867001
Vehicle Fitment
HONDA: CIVIC II Shuttle (EE) 1.4 i 16V (EE1) 1988-1992, CIVIC IV Hatchback (EC, ED, EE) 1.4 L (EC9) 1987-1991, CONCERTO (HW, MA) 1.4 1989-1992
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- OE-match design for HONDA CIVIC and CONCERTO applications.
- Push-type release bearing configuration compatible with original clutch systems.
- Cross-references with SKF VKC3617, LUK 500049060, and SACHS 3151867001.
- Multiple OE number interchange: 22810-PL3-005 and 22810-PL3-003.
- Multiple interchange numbers including 47TKB3101A, 614077, BRG427, and PRB37.
- Factory pre-lubricated with high-temperature grease for immediate installation.
Installation Notes
- Inspect the clutch fork and pivot ball for wear before installing the new release bearing.
- Clean the input shaft sleeve thoroughly and check for scoring or burrs that could damage the bearing.
- Apply a light coat of high-temperature grease to the sleeve contact surface – avoid over-greasing.
- Torque the retaining bolts to HONDA factory specifications for secure attachment.
- Confirm clutch slave cylinder pushrod travel is within factory range to avoid over-travel.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces release bearings to OE specifications. Contact us
