Ordinary Release Bearing VKC2189
The DUHUI VKC2189 ordinary release bearing is a direct replacement engineered for RENAULT 18, 20, and 18 Estate Van applications. This release bearing matches OE specifications including 7704001363 and cross-references with SKF VKC2189, LUK 500027530, and SACHS 3151846001.
Specifications
| Parameter | Value |
|---|---|
| DH Code | |
| Part Number | VKC2189 |
| Warranty | 2 years / 50,000 km |
| Type | Push-type |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code:
OE Numbers: 7704001363, 7701464673, 7701349113, 7700692431, 7700674114
Reference Numbers (Interchange):
SKF: VKC2189
Timken: F-265315, I-R089, CR1214, HD4330, CCT206, C0040
LUK: 500027530
SACHS: 3151846001, 1850282654
Vehicle Fitment
RENAULT: 18 (134_) 1.6 TS (1342) 1982-1986, 18 Estate Van 2.1 Diesel 1981-1986, 20 (127_) 1.6 (1271) 1977-1983
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- OE-match design for RENAULT 18, 20, and 18 Estate Van applications.
- Push-type release bearing configuration compatible with original clutch systems.
- Cross-references with SKF VKC2189, LUK 500027530, and SACHS 3151846001.
- Multiple OE number interchange including 7704001363, 7701464673, and 7701349113.
- Multiple interchange numbers including F-265315, I-R089, CR1214, HD4330, CCT206, and C0040.
- Factory pre-lubricated with high-temperature grease for immediate installation.
Installation Notes
- Inspect the clutch fork and pivot ball for wear before installing the new release bearing.
- Clean the input shaft sleeve thoroughly and check for scoring or burrs that could damage the bearing.
- Apply a light coat of high-temperature grease to the sleeve contact surface – avoid over-greasing.
- Torque the retaining bolts to RENAULT factory specifications for secure attachment.
- Confirm clutch slave cylinder pushrod travel is within factory range to avoid over-travel.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces release bearings to OE specifications. Contact us
