Ordinary Release Bearing VKC3609
The DUHUI VKC3609 ordinary release bearing is a direct replacement engineered for MAZDA and KIA applications. This release bearing matches OE specifications including K201-16-510 and cross-references with SKF VKC3609, LUK 500063910, and SACHS 3151600517.
Specifications
| Parameter | Value |
|---|---|
| DH Code | |
| Part Number | VKC3609 |
| Warranty | 2 years / 50,000 km |
| Type | Push-type |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code:
OE Numbers: K201-16-510, MB301-16-510A, D203-16-510, K203-16-510, 0K241-16-510A, 0K2A1-16-510A
Reference Numbers (Interchange):
SKF: VKC3609
Timken: PRB10
LUK: 500063910
SACHS: 3151600517
Vehicle Fitment
MAZDA: 121 I (DA) 1.1 (DA101) 1987-1990, 121 II (DB) 1.3 16V (DB3PA) 1990-1996, 323 C IV (BG) 1.3 (BG3S) 1989-1994
KIA: CARENS II MPV (FJ) 1.6 2002-2006, PRIDE Estate 1.3 1999-2001, RIO I Hatchback (DC) 1.3 2000-2005
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- OE-match design for MAZDA 121, 323, and KIA CARENS, PRIDE, RIO applications.
- Push-type release bearing configuration compatible with original clutch systems.
- Cross-references with SKF VKC3609, LUK 500063910, and SACHS 3151600517.
- Multiple OE number interchange including K201-16-510, MB301-16-510A, and D203-16-510.
- Interchange number: PRB10.
- Factory pre-lubricated with high-temperature grease for immediate installation.
Installation Notes
- Inspect the clutch fork and pivot ball for wear before installing the new release bearing.
- Clean the input shaft sleeve thoroughly and check for scoring or burrs that could damage the bearing.
- Apply a light coat of high-temperature grease to the sleeve contact surface – avoid over-greasing.
- Torque the retaining bolts to MAZDA or KIA factory specifications for secure attachment.
- Confirm clutch slave cylinder pushrod travel is within factory range to avoid over-travel.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces release bearings to OE specifications. Contact us
