Ordinary Release Bearing VKC3602
The DUHUI VKC3602 ordinary release bearing is a direct replacement engineered for MAZDA and KIA applications. This release bearing matches OE specifications including B315-16-510 and cross-references with SKF VKC3602, LUK 500063910, and SACHS 3151858001.
Specifications
| Parameter | Value |
|---|---|
| DH Code | |
| Part Number | VKC3602 |
| Warranty | 2 years / 50,000 km |
| Type | Push-type |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code:
OE Numbers: B315-16-510, B301-15-510A, B301-16-510A, B301-16-510, B311-16-510, KB301-16-510
Reference Numbers (Interchange):
SKF: VKC3602
Timken: CBU472921C, FCR47-8-3/2E, FCR47-8-4/2E, 47SCRN35-P2/6, 47SCRN34P, 47SCRN34K-6, 63453
LUK: 500063910
SACHS: 3151858001
Vehicle Fitment
MAZDA: 121 I (DA) 1.1 (DA101) 1987-1990, 2 (DE_, DH_) 1.3 (DE3FS) 2007-2015, 2 Hatchback (DL, DJ) 1.5 (DJ2HA) 2014-
KIA: PRIDE (DA) 1.3 1996-2001, SEPHIA Saloon (FA) 1.5 i GTX 1996-1997, SHUMA Saloon (FB) 1.5 1996-1998
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- OE-match design for MAZDA 121, 2, and KIA PRIDE, SEPHIA, SHUMA applications.
- Push-type release bearing configuration compatible with original clutch systems.
- Cross-references with SKF VKC3602, LUK 500063910, and SACHS 3151858001.
- Multiple OE number interchange including B315-16-510, B301-15-510A, and B301-16-510A.
- Multiple interchange numbers including CBU472921C, FCR47-8-3/2E, and 47SCRN34P.
- Factory pre-lubricated with high-temperature grease for immediate installation.
Installation Notes
- Inspect the clutch fork and pivot ball for wear before installing the new release bearing.
- Clean the input shaft sleeve thoroughly and check for scoring or burrs that could damage the bearing.
- Apply a light coat of high-temperature grease to the sleeve contact surface – avoid over-greasing.
- Torque the retaining bolts to MAZDA or KIA factory specifications for secure attachment.
- Confirm clutch slave cylinder pushrod travel is within factory range to avoid over-travel.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces release bearings to OE specifications. Contact us
