Ordinary Release Bearing VKC3623
The DUHUI VKC3623 ordinary release bearing is a direct replacement engineered for SUZUKI ALTO and BALENO applications. This release bearing matches OE specifications including 23265-65G00 and cross-references with SKF VKC3623, LUK 500058960, and SACHS 3151819002.
Specifications
| Parameter | Value |
|---|---|
| DH Code | |
| Part Number | VKC3623 |
| Warranty | 2 years / 50,000 km |
| Type | Push-type |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code:
OE Numbers: 23265-65G00, 09269-28006, 4703047, 9205336
Reference Numbers (Interchange):
SKF: VKC3623
Timken: RCTS28SA, FCR40-41-3, FCR50-35-6/5K, FCR50-21/5K, 614082, BRG454
LUK: 500058960
SACHS: 3151819002
Vehicle Fitment
SUZUKI: ALTO IV (EF, SH410_) 1.0 (SH410) 1994-2002, BALENO (EG) 1.3 (SY413) 1996-2002, BALENO Estate (EG) 1.3 16V (SY413) 1997-2002
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- OE-match design for SUZUKI ALTO and BALENO applications.
- Push-type release bearing configuration compatible with original clutch systems.
- Cross-references with SKF VKC3623, LUK 500058960, and SACHS 3151819002.
- Multiple OE number interchange: 23265-65G00, 09269-28006, 4703047, 9205336.
- Multiple interchange numbers including RCTS28SA, FCR40-41-3, FCR50-35-6/5K, FCR50-21/5K, 614082, and BRG454.
- Factory pre-lubricated with high-temperature grease for immediate installation.
Installation Notes
- Inspect the clutch fork and pivot ball for wear before installing the new release bearing.
- Clean the input shaft sleeve thoroughly and check for scoring or burrs that could damage the bearing.
- Apply a light coat of high-temperature grease to the sleeve contact surface – avoid over-greasing.
- Torque the retaining bolts to SUZUKI factory specifications for secure attachment.
- Confirm clutch slave cylinder pushrod travel is within factory range to avoid over-travel.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces release bearings to OE specifications. Contact us
