Ordinary Release Bearing VKC3567
The DUHUI VKC3567 ordinary release bearing is a direct replacement engineered for SUZUKI ALTO, BALENO, and IGNIS applications. This release bearing matches OE specifications including 09269-28004 and cross-references with SKF VKC3567, LUK 500032560, and SACHS 3151819001.
Specifications
| Parameter | Value |
|---|---|
| DH Code | |
| Part Number | VKC3567 |
| Warranty | 2 years / 50,000 km |
| Type | Push-type |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code:
OE Numbers: 09269-28004, 09269-28005, 09269-53004
Reference Numbers (Interchange):
SKF: VKC3567
Timken: RCT283SA, FCR44-29-9/5K, FCR44-9/2E, 614050, BRG378
LUK: 500032560
SACHS: 3151819001
Vehicle Fitment
SUZUKI: ALTO VI (FF) 1.1 (RF410) 2004-2008, BALENO (FW, EW) 1.2 (A1K412) 2016-, IGNIS III (MF, FF) 1.2 (ATK412) 2016-
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- OE-match design for SUZUKI ALTO, BALENO, and IGNIS applications.
- Push-type release bearing configuration compatible with original clutch systems.
- Cross-references with SKF VKC3567, LUK 500032560, and SACHS 3151819001.
- Multiple OE number interchange: 09269-28004, 09269-28005, 09269-53004.
- Multiple interchange numbers including RCT283SA, FCR44-29-9/5K, FCR44-9/2E, 614050, and BRG378.
- Factory pre-lubricated with high-temperature grease for immediate installation.
Installation Notes
- Inspect the clutch fork and pivot ball for wear before installing the new release bearing.
- Clean the input shaft sleeve thoroughly and check for scoring or burrs that could damage the bearing.
- Apply a light coat of high-temperature grease to the sleeve contact surface – avoid over-greasing.
- Torque the retaining bolts to SUZUKI factory specifications for secure attachment.
- Confirm clutch slave cylinder pushrod travel is within factory range to avoid over-travel.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces release bearings to OE specifications. Contact us
