Ordinary Release Bearing VKC3578
The DUHUI VKC3578 ordinary release bearing is a direct replacement engineered for DAIHATSU APPLAUSE, CHARADE, and COPEN applications. This release bearing matches OE specifications including 31230-97201 and cross-references with SKF VKC3578, LUK 500105560, and SACHS 3151600532.
Specifications
| Parameter | Value |
|---|---|
| DH Code | |
| Part Number | VKC3578 |
| Warranty | 2 years / 50,000 km |
| Type | Push-type |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code:
OE Numbers: 31230-97201, 31230-97202
Reference Numbers (Interchange):
SKF: VKC3578
Timken: CBU442822GC
LUK: 500105560
SACHS: 3151600532
Vehicle Fitment
DAIHATSU: APPLAUSE I Hatchback (A101, A111) 1.6 16V (A101) 1989-1997, CHARADE II (G11, G30) 1.0 (G11) 1983-1987, COPEN (L880_, L881_) 0.7 2003-2012
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- OE-match design for DAIHATSU APPLAUSE, CHARADE, and COPEN applications.
- Push-type release bearing configuration compatible with original clutch systems.
- Cross-references with SKF VKC3578, LUK 500105560, and SACHS 3151600532.
- Multiple OE number interchange: 31230-97201 and 31230-97202.
- Interchange number: CBU442822GC.
- Factory pre-lubricated with high-temperature grease for immediate installation.
Installation Notes
- Inspect the clutch fork and pivot ball for wear before installing the new release bearing.
- Clean the input shaft sleeve thoroughly and check for scoring or burrs that could damage the bearing.
- Apply a light coat of high-temperature grease to the sleeve contact surface – avoid over-greasing.
- Torque the retaining bolts to DAIHATSU factory specifications for secure attachment.
- Confirm clutch slave cylinder pushrod travel is within factory range to avoid over-travel.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces release bearings to OE specifications. Contact us
