Ordinary Release Bearing VKC3629
The DUHUI VKC3629 ordinary release bearing is a direct replacement engineered for SUBARU JUSTY and LIBERO applications. This release bearing matches OE specifications including 30508-KA000 and cross-references with SKF VKC3629, LUK 500060460, and SACHS 3151997401.
Specifications
| Parameter | Value |
|---|---|
| DH Code | |
| Part Number | VKC3629 |
| Warranty | 2 years / 50,000 km |
| Type | Push-type |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code:
OE Numbers: 30508-KA000, 30508-KA001, 30508-KA040
Reference Numbers (Interchange):
SKF: VKC3629
Timken: 614160
LUK: 500060460
SACHS: 3151997401
Vehicle Fitment
SUBARU: JUSTY I (KAD) 1200 (KA7) 1987-1995, JUSTY I (KAD) 1200 4WD (KA8) 1990-1996, LIBERO Bus (E10, E12) 1.2 4WD (E12, KJ8) 1986-2000
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- OE-match design for SUBARU JUSTY and LIBERO applications.
- Push-type release bearing configuration compatible with original clutch systems.
- Cross-references with SKF VKC3629, LUK 500060460, and SACHS 3151997401.
- Multiple OE number interchange: 30508-KA000, 30508-KA001, 30508-KA040.
- Interchange number: 614160.
- Factory pre-lubricated with high-temperature grease for immediate installation.
Installation Notes
- Inspect the clutch fork and pivot ball for wear before installing the new release bearing.
- Clean the input shaft sleeve thoroughly and check for scoring or burrs that could damage the bearing.
- Apply a light coat of high-temperature grease to the sleeve contact surface – avoid over-greasing.
- Torque the retaining bolts to SUBARU factory specifications for secure attachment.
- Confirm clutch slave cylinder pushrod travel is within factory range to avoid over-travel.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces release bearings to OE specifications. Contact us
