Ordinary Release Bearing VKC2501
The DUHUI VKC2501 release bearing is an OE-replacement component designed for a wide range of FIAT, ALFA ROMEO, and LANCIA models with 1.4 to 2.0 liter engines. This ordinary release bearing matches OE specifications including 7628856, 60657198, and 5888408, and cross-references with SKF VKC2501, LUK 500040130, and SACHS 3151837002.
Specifications
| Parameter | Value |
|---|---|
| DH Code | |
| Part Number | VKC2501 |
| Type | Ordinary (Mechanical) |
| Warranty | 2 years / 50,000 km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code:
OE Numbers: 7628856, 60657198, 5888408, 60806065, 46821337
Reference Numbers (Interchange):
SKF: VKC2501
LUK: 500040130
SACHS: 3151837002, 1850282666
RB9816, F-279612, I-R158, C0024, CR1149
Vehicle Fitment
FIAT: BARCHETTA (183_) 1.8 16V 1995-2005
FIAT: BRAVA (182_) 1.8 GT 16V (182.BC) 1995-2001
FIAT: COUPE (175_) 1.8 16V 1996-2000
ALFA ROMEO: 145 (930_) 1.4 i.e. 16V T.S. (930.A3A) 1996-2001
ALFA ROMEO: 146 (930_) 1.9 TD (930.B4A) 1994-1999
ALFA ROMEO: 156 Sportwagon (932_) 2.0 JTS (932BXA) 2002-2006
LANCIA: DEDRA (835_) 1.8 16V LE (835FG) 1996-1999
LANCIA: DEDRA SW (835_) 1.8 16V LE (835FG) 1996-1999
LANCIA: DELTA II (836_) 1.8 i.e. 16V (836AQ) 1996-1999
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Ordinary (mechanical) release bearing designed for FIAT, ALFA ROMEO, and LANCIA clutch systems.
- OE-match design with multiple OE number interchange: 7628856, 60657198, 5888408, 60806065, and 46821337.
- Cross-references with SKF VKC2501, LUK 500040130, and SACHS 3151837002.
- Factory pre-lubricated for reliable clutch disengagement.
- 2-year / 50,000 km warranty for aftermarket assurance.
Installation Notes
- Inspect the guide sleeve and clutch fork for wear before installing the new release bearing.
- Clean the transmission input shaft and guide tube thoroughly before installation.
- Apply a light coat of high-temperature grease to the release bearing contact points per manufacturer specifications.
- Verify smooth sliding movement of the bearing on the guide tube before transmission reassembly.
- Torque the retaining bolts to FIAT / ALFA ROMEO / LANCIA factory specifications.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces release bearings to OE specifications. Contact us
