Hydraulic Release Bearing 55209138
The DUHUI 55209138 hydraulic release bearing is a direct OE-replacement component designed for FIAT Stilo, Bravo II, Idea, and Ritmo III models with 1.6 D Multijet and 1.9 D Multijet engines from 2005 to 2014. This hydraulic clutch release bearing matches OE specifications including 55209138 and cross-references with 510014210, 3182600125, ZA2401041, and 55180328.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DH13-0124 |
| Part Number | 55209138 |
| Type | Hydraulic |
| Warranty | 2 years / 50,000 km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DH13-0124
OE Numbers: 55209138, 510014210, 3182600125, ZA2401041, 55180328
Vehicle Fitment
FIAT: Bravo II (198_) 1.6 D Multijet (198AXH1B) 2007-2014
FIAT: Idea 1.6 D Multijet 2005-2010
FIAT: Ritmo III (198_) 1.6 D Multijet 2007-2010
FIAT: Stilo (192_) 1.6 D Multijet 2005-2008
FIAT: Stilo Multi Wagon (192_) 1.9 D Multijet 2005-2008
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Hydraulic release bearing engineered for FIAT 1.6 D Multijet and 1.9 D Multijet clutch systems.
- OE-match design with multiple OE number interchange: 55209138, 510014210, 3182600125, ZA2401041, and 55180328.
- Integrated hydraulic actuation – eliminates mechanical linkage.
- Factory pre-lubricated and sealed for extended service life.
- 2-year / 50,000 km warranty for aftermarket assurance.
Installation Notes
- Inspect the clutch fork and guide sleeve for wear before installing the new hydraulic release bearing.
- Clean the transmission input shaft sleeve thoroughly and check for scoring or burrs.
- Do not depress the clutch pedal before the hydraulic system is fully bled.
- Bleed the hydraulic system completely after installation to remove air.
- Torque the retaining bolts to FIAT factory specifications.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces hydraulic release bearings to OE specifications. Contact us
