Wheel Bearing DAC38740236/33 OPEN
The DUHUI Bearing DAC38740236/33-2RZ double-row wheel bearing is an OE-replacement solution for the Nissan 100NX (B13) from 1990 to 1994, as well as other compatible Nissan models . This double-row angular contact ball bearing features rubber seals on both sides (2RZ) for enhanced contamination protection and grease retention . Manufactured to match original equipment specifications including DAC38740236/33-2RZ and BCA 514002, this wheel bearing delivers dependable performance for compatible Nissan vehicles .
Technical Specifications
| Specification | mm | inch |
|---|---|---|
| DH Code | DWB0052 | |
| Part Number | DAC38740236/33-2RZ | |
| Product Type | Double Row Angular Contact Ball Bearing | |
| Fitting Position | Front Axle (Both Sides) | |
| Inner Diameter | 38.00 mm | 1.496 in |
| Outer Diameter | 74.00 mm | 2.913 in |
| Width (B) | 36.00 mm | 1.417 in |
| Width (C) | 33.00 mm | 1.299 in |
| Seal Type | 2RZ (Double Rubber Seal) | |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWB0052
OE Numbers:
DAC38740236/33-2RZ
Reference Numbers (Interchange):
BCA: 514002
FEBEST: DAC38740236-33
SKF: VKBA1352
FAG: 713614680
Vehicle Fitment
NISSAN 100NX (B13): 1.6 1990-1994
Additional compatible models (verify before ordering):
NISSAN: 100NX (B13) 1.6 SR (1990-1994), 100NX 2.0 GTI (1991-1994), Sunny (B13) 1990-1995
Engine Compatibility: GA16DS 1.6L (66 kW / 90 hp), GA16DE 1.6L (75 kW / 102 hp), SR20DE 2.0L (110 kW / 150 hp)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Double-row angular contact ball bearing design provides stable load distribution and extended service life .
- 2RZ rubber seals on both sides provide effective contamination protection and grease retention .
- Manufactured from high-carbon chromium bearing steel (GCr15) for durability under load .
- Precision-ground raceways ensure smooth rotation and precise wheel guidance .
- Pre-lubricated and sealed design reduces maintenance requirements .
- Interchangeable with FEBEST DAC38740236-33 and BCA 514002 .
Installation Notes
- Confirm inner diameter is 38.00 mm (1.496 in), outer diameter is 74.00 mm (2.913 in), and width is 36.00 mm (1.417 in) before installation .
- This bearing is designed for both sides of the front axle on Nissan 100NX models .
- Do not attempt to disassemble the wheel bearing unit or remove the seals – this will cause permanent damage .
- Press the bearing into the hub using appropriate tools – never strike with a hammer .
- Torque the hub nut to manufacturer specifications (refer to the Nissan service manual) .
- Verify fitment for your specific Nissan 100NX or Sunny model before ordering .
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel bearings and automotive components to OE specifications. Contact us
