Wheel Bearing DAC38710039-2RZ
The DUHUI Bearing DAC38710039-2RZ double-row wheel bearing is an OE-replacement solution for the Toyota Yaris (_P1_) 1.0 (SCP10_, SCP10R) from 2003 to 2005, as well as other compatible Toyota applications. This double-row angular contact ball bearing features rubber seals on both sides (2RZ) for enhanced contamination protection and grease retention. Manufactured to match original equipment specifications including DAC38710039-2RZ and BCA 510062, this wheel bearing delivers dependable performance for compatible Toyota vehicles.
Technical Specifications
| Specification | mm | inch |
|---|---|---|
| DH Code | DWB0046 | |
| Part Number | DAC38710039-2RZ | |
| Product Type | Double Row Angular Contact Ball Bearing | |
| Fitting Position | Front Axle | |
| Inner Diameter (d) | 38.00 mm | 1.496 in |
| Outer Diameter (D) | 71.00 mm | 2.795 in |
| Width (B) | 39.00 mm | 1.535 in |
| Seal Type | 2RZ (Double Rubber Seal) | |
| Material | GCr15 Chrome Steel | |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWB0046
OE Numbers:
DAC38710039-2RZ, 510062, 3103200M00
Reference Numbers (Interchange):
BCA: 510062
SKF: VKBA3729
FAG: 713618550
FEBEST: DAC38710039
Vehicle Fitment
TOYOTA YARIS (_P1_): 1.0 (SCP10_, SCP10R) 2003-2005
Additional compatible models (verify before ordering):
TOYOTA: Yaris/Vitz 1.0 (1999-2005), Yaris/Vitz 1.3 (1999-2005), Echo (2000-2005)
SCION: xA (2004-2006), xB (2004-2006)
Engine Compatibility: 1SZ-FE 1.0L (48 kW / 65 hp), 2NZ-FE 1.3L, 1NZ-FE 1.5L
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Double-row angular contact ball bearing design provides stable load distribution and extended service life.
- 2RZ rubber seals on both sides provide effective contamination protection and grease retention.
- Manufactured from GCr15 high-carbon chromium bearing steel for durability under load.
- Precision-ground raceways ensure smooth rotation and precise wheel guidance.
- Pre-lubricated and sealed design reduces maintenance requirements.
- Interchangeable with BCA 510062 and SKF VKBA3729.
Installation Notes
- Confirm inner diameter is 38.00 mm (1.496 in), outer diameter is 71.00 mm (2.795 in), and width is 39.00 mm (1.535 in) before installation.
- Do not attempt to disassemble the wheel bearing unit or remove the seals – this will cause permanent damage.
- Press the bearing into the hub using appropriate tools – never strike with a hammer.
- Torque the hub nut to manufacturer specifications (refer to the Toyota service manual).
- Verify fitment for your specific Toyota Yaris, Vitz, or Echo model before ordering.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel bearings and automotive components to OE specifications. Contact us
