Wheel Hub 520100
The DUHUI Bearing 520100 front wheel hub is a direct OE-replacement assembly designed for Ford Taurus and Lincoln Continental models from 1991 through 1995. This front wheel hub bearing matches OE references FW6100K and BR930152K, delivering factory-spec performance for mid-size sedan and luxury sedan applications without ABS sensor.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH01640 |
| Part Number | 520100 |
| Position | Front Axle |
| Flange Diameter | 139.45 mm (5.490 inch) |
| Bolt Circle Diameter | 107.95 mm (4.250 inch) |
| Hub Pilot Diameter | 76.20 mm (3.000 inch) |
| Wheel Pilot Diameter | 63.25 mm (2.490 inch) |
| Brake Pilot Diameter | 70.87 mm (2.790 inch) |
| Flange Offset | 56.64 mm (2.230 inch) |
| Bolt Size | M12 x 1.5 |
| Wheel Stud Quantity | 5 |
| Spline Quantity | 26 |
| ABS Sensor | Not Included |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH01640
OE Numbers: 520100, FW6100K, BR930152K
Reference Numbers (Interchange):
SKF: BR930152K
Timken: HA590731
NTN: HUB220
Vehicle Fitment
Ford: Taurus (1991 from Feb 1, 1991 through 1995)
Lincoln: Continental (1991 from Feb 1, 1991 through 1994)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Front axle wheel hub bearing engineered for Ford Taurus and Lincoln Continental applications.
- 5-stud configuration with 26-spline axle interface matches factory driveline specifications.
- 139.45mm flange diameter with M12 x 1.5 wheel studs provides proper load capacity.
- Non-ABS version – does not include ABS sensor ring. Suitable for vehicles without ABS or for ABS-deleted applications.
- Direct OE cross-reference to FW6100K and BR930152K.
Installation Notes
- Confirm 5-stud pattern, 107.95mm bolt circle, 139.45mm flange diameter, 26-spline count, and M12 x 1.5 bolt size match your original hub before installation. Note: This hub does not include an ABS sensor ring.
- Inspect the steering knuckle bore for wear or damage prior to fitting the new hub.
- Clean all mounting surfaces thoroughly to prevent improper seating.
- Torque the hub retaining nut and wheel lug nuts to Ford/Lincoln factory specifications.
- Rotate the hub after installation to confirm smooth operation before road testing.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hubs to OE specifications. Contact us
