Wheel Hub H5W001BTA
The DUHUI Bearing H5W001BTA front wheel hub is a direct OE-replacement assembly designed for SEAT Cordoba models produced between 1993 and 2002. This front wheel hub bearing matches OE references 485404, 1141401900, 4200040, and 103478, delivering factory-spec performance for compact sedan applications.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH2017 |
| Part Number | H5W001BTA |
| Position | Front Axle (Left and Right) |
| Outer Diameter | 65.00 mm (2.559 inch) |
| Height | 74.00 mm (2.913 inch) |
| Hub Diameter | 40.00 mm (1.575 inch) |
| Bolt Circle Diameter | 100.00 mm (3.937 inch) |
| Number of Holes | 4 |
| Number of Teeth | 22 |
| Weight | 1.41 kg (3.110 lb) |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH2017
OE Numbers: H5W001BTA, 485404, 1141401900, 4200040, 103478
Reference Numbers (Interchange):
SKF: VKBA 7081
Timken: HA590732
NTN: HUB221
Vehicle Fitment
SEAT: Cordoba (6K1, 6K2) 1.0 i (1996-2002)
SEAT: Cordoba (6K1, 6K2) 1.4 i (1994-2002)
SEAT: Cordoba (6K1, 6K2) 1.4 i 16V (1996-2002)
SEAT: Cordoba (6K1, 6K2) 1.4 16V (2000-2002)
SEAT: Cordoba (6K1, 6K2) 1.6 i (1993-2002)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Front axle wheel hub bearing engineered for SEAT Cordoba compact sedan applications.
- 65mm outer diameter with 40mm hub diameter matches factory bearing dimensions.
- 74mm height with 4-hole, 100mm bolt circle configuration fits original hub mounting.
- 22-tooth interface matches factory driveline specifications.
- Lightweight 1.41kg design for reduced unsprung mass.
Installation Notes
- Confirm outer diameter (65mm), height (74mm), hub diameter (40mm), 4-hole pattern, 100mm bolt circle, and 22-tooth count match your original bearing before installation.
- This hub fits both left and right front axle positions.
- Inspect the steering knuckle bore for wear or damage prior to fitting the new hub.
- Clean all mounting surfaces thoroughly to prevent improper seating.
- Torque the hub retaining nut and wheel lug nuts to SEAT Cordoba factory specifications.
- Rotate the hub after installation to confirm smooth operation before road testing.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hubs to OE specifications. Contact us
