Wheel Hub 326184
The DUHUI Bearing 326184 front wheel hub is a direct OE-replacement assembly designed for Opel Ascona C and Kadett D/E models spanning 1979 through 1993. This front wheel hub bearing matches OE references 326173 and 90251816, delivering factory-spec performance for classic Opel passenger car applications.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH2004 |
| Part Number | 326184 |
| Position | Front Axle |
| Diameter 1 | 39.00 mm (1.535 inch) |
| Diameter 2 | 56.50 mm (2.224 inch) |
| Height | 81.00 mm (3.189 inch) |
| Rim Hole Number | 4 |
| Number of Teeth | 33 |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH2004
OE Numbers: 326184, 326173, 90251816
Reference Numbers (Interchange):
SKF: VKBA 7092
Timken: HA590749
NTN: HUB237
Vehicle Fitment
Opel: Ascona C Sedan (81, 86, 87, 88) (1981-1988)
Opel: Ascona C Hatchback (84, 89) (1981-1988)
Opel: Kadett D Hatchback (31-34, 41-44) (1979-1984)
Opel: Kadett D Estate (35, 36, 45, 46) (1979-1984)
Opel: Kadett E Sedan (39, 49) (1984-1993)
Opel: Kadett E Convertible (43B) (1986-1993)
Opel: Kadett E Hatchback (33, 34, 43, 44) (1984-1991)
Opel: Kadett E Estate (35, 36, 45, 46) (1984-1991)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Front axle wheel hub bearing engineered for Opel Ascona and Kadett classic applications.
- 81mm height with dual diameter design (39mm/56.5mm) matches factory specifications.
- 4-hole configuration with 33-tooth count fits original hub and axle interface.
- Direct OE cross-reference to 326173 and 90251816 ensures accurate replacement.
- Factory-sealed bearing unit reduces contamination risk during service life.
Installation Notes
- Confirm diameters (39mm and 56.5mm), height (81mm), 4-hole pattern, and 33-tooth count match your original bearing before installation.
- Inspect the steering knuckle bore for wear or damage prior to fitting the new hub.
- Clean all mounting surfaces thoroughly to prevent improper seating.
- Torque the hub retaining nut and wheel lug nuts to Opel factory specifications.
- Rotate the hub after installation to confirm smooth operation before road testing.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hubs to OE specifications. Contact us
