Wheel Hub 541011
The DUHUI Bearing 541011 front wheel hub is a direct OE-replacement assembly designed for Nissan Frontier and Suzuki Equator pickup truck models from 2005 through 2012 with various engine configurations. This front wheel hub bearing matches OE references 43210EA200 and BR930752, and features an integrated ABS sensor for full system compatibility.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH1652 |
| Part Number | 541011 |
| Position | Front Axle |
| Flange Diameter | 137.99 mm (5.433 inch) |
| Bolt Circle Diameter | 114.30 mm (4.500 inch) |
| Wheel Pilot Diameter | 67.06 mm (2.640 inch) |
| Brake Pilot Diameter | 71.88 mm (2.830 inch) |
| Bolt Size | M12 x 1.5 |
| Wheel Stud Quantity | 5 |
| ABS Sensor | Integrated |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH1652
OE Numbers: 541011, 43210EA200, BR930752
Reference Numbers (Interchange):
SKF: BR930752
Timken: HA590754
NTN: HUB242
Vehicle Fitment
Nissan: Frontier LE V6 4.0L (2005-2010)
Nissan: Frontier NISMO Off-Road V6 4.0L (2005-2008)
Nissan: Frontier PRO-4X V6 4.0L (2009-2012)
Nissan: Frontier S L4 2.5L (2011-2012)
Suzuki: Equator Base L4 2.5L (2009-2011)
Suzuki: Equator Base V6 4.0L (2009)
Suzuki: Equator JX V6 4.0L (2009)
Suzuki: Equator Premium L4 2.5L (2009-2011)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Front axle wheel hub bearing engineered for Nissan Frontier and Suzuki Equator pickup truck applications.
- Integrated ABS sensor eliminates separate sensor purchase and installation.
- 5-stud configuration with M12 x 1.5 thread size matches factory specifications.
- 137.99mm flange diameter with 114.30mm bolt circle provides proper load capacity.
- Direct OE cross-reference to 43210EA200 and BR930752.
Installation Notes
- Confirm 5-stud pattern, 114.30mm bolt circle, 137.99mm flange diameter, and M12 x 1.5 thread size match your original hub before installation.
- Inspect the steering knuckle bore for wear or damage prior to fitting the new hub.
- Clean all mounting surfaces thoroughly and verify ABS sensor connector compatibility.
- Torque the hub retaining nut and wheel lug nuts to Nissan or Suzuki factory specifications.
- After installation, verify ABS sensor function with a diagnostic tool.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hubs to OE specifications. Contact us
