Wheel Hub 515042
The DUHUI Bearing 515042 front wheel hub is a direct OE-replacement assembly designed for Ford Expedition and Lincoln Navigator RWD models from 2002 through 2006. This front wheel hub bearing matches OE references 052002B, SP450106, and BR930457, and features an integrated ABS sensor for full system compatibility.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH1538 |
| Part Number | 515042 |
| Position | Front Axle |
| Flange Diameter | 182.88 mm (7.200 inch) |
| Flange Shape | Triangular |
| Bolt Circle Diameter | 134.62 mm (5.300 inch) |
| Hub Pilot Diameter | 99.06 mm (3.900 inch) |
| Wheel Pilot Diameter | 86.36 mm (3.400 inch) |
| Brake Pilot Diameter | 88.90 mm (3.500 inch) |
| Hub Bolt Circle Diameter | 160.02 mm (6.300 inch) |
| Flange Offset | 38.10 mm (1.500 inch) |
| Wheel Stud Quantity | 6 |
| Mounting Bolt Holes | 4 |
| ABS Sensor | Integrated |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH1538
OE Numbers: 515042, 052002B, SP450106, BR930457
Reference Numbers (Interchange):
SKF: SP450106
Timken: HA590811
NTN: HUB319
Vehicle Fitment
Ford: Expedition RWD (2002-2006)
Lincoln: Navigator RWD (2003-2006)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Front axle wheel hub bearing engineered for Ford Expedition and Lincoln Navigator RWD SUV applications.
- Integrated ABS sensor eliminates separate sensor purchase and installation.
- 6-stud configuration matches factory specifications.
- Triangular flange design with 182.88mm flange diameter and 134.62mm bolt circle provides robust load capacity.
- Direct OE cross-reference to 052002B, SP450106, and BR930457.
Installation Notes
- Confirm 6-stud pattern, 134.62mm bolt circle, 182.88mm flange diameter, triangular flange shape, and 4-bolt mounting configuration match your original hub before installation.
- Verify RWD (2WD) application – this hub is not for 4WD configurations.
- Inspect the steering knuckle bore for wear or damage prior to fitting the new hub.
- Clean all mounting surfaces thoroughly and verify ABS sensor connector compatibility.
- Torque the hub retaining nut and wheel lug nuts to Ford/Lincoln factory specifications.
- After installation, verify ABS sensor function with a diagnostic tool.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hubs to OE specifications. Contact us
