Wheel Hub 515041
The DUHUI Bearing 515041 front wheel hub is a direct OE-replacement assembly designed for GM C/K 1500, 2500, and 3500 pickup trucks and Suburban models from 1996 through 2000 with 8-stud hub assembly. This front wheel hub bearing matches OE references FW741, 50741, and LFW138X, and features an integrated ABS sensor for full system compatibility.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH1537 |
| Part Number | 515041 |
| Position | Front Axle |
| Flange Diameter | 208.28 mm (8.200 inch) |
| Bolt Circle Diameter | 165.10 mm (6.500 inch) |
| Hub Pilot Diameter | 104.14 mm (4.100 inch) |
| Wheel Pilot Diameter | 116.84 mm (4.600 inch) |
| Brake Pilot Diameter | 116.84 mm (4.600 inch) |
| Hub Bolt Circle Diameter | 139.70 mm (5.500 inch) |
| Flange Offset | 68.58 mm (2.700 inch) |
| Wheel Stud Quantity | 8 |
| Mounting Bolt Holes | 4 |
| Spline Quantity | 33 |
| ABS Sensor | Integrated |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH1537
OE Numbers: 515041, FW741, 50741, LFW138X
Reference Numbers (Interchange):
SKF: FW741
Timken: HA590812
NTN: HUB320
Vehicle Fitment
Chevrolet/GMC: C/K 1500 8-Stud Hub Assembly (1996-1999)
Chevrolet/GMC: C/K 2500 (1996-2000)
Chevrolet/GMC: C/K 2500 Suburban (1996-1999)
Chevrolet/GMC: C/K 3500 (1996-2000)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Front axle wheel hub bearing engineered for GM C/K series heavy-duty pickup and Suburban applications.
- Integrated ABS sensor eliminates separate sensor purchase and installation.
- 8-stud configuration with 33-spline axle interface matches heavy-duty factory specifications.
- 208.28mm flange diameter with 165.10mm bolt circle provides maximum load capacity.
- Direct OE cross-reference to FW741, 50741, and LFW138X.
Installation Notes
- Confirm 8-stud pattern, 165.10mm bolt circle, 208.28mm flange diameter, 33-spline count, and 4-bolt mounting configuration match your original hub before installation.
- Verify 8-stud hub assembly configuration – this hub applies to specific models with 8-stud assemblies.
- Inspect the steering knuckle bore for wear or damage prior to fitting the new hub.
- Clean all mounting surfaces thoroughly and verify ABS sensor connector compatibility.
- Torque the hub retaining nut and wheel lug nuts to GM C/K series factory specifications.
- After installation, verify ABS sensor function with a diagnostic tool.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hubs to OE specifications. Contact us
