Wheel Hub 513310
The DUHUI Bearing 513310 front wheel hub is a direct OE-replacement assembly designed for Nissan Murano SUV and Quest minivan models with 3.5L V6 engine from 2003 through 2009. This front wheel hub bearing matches OE references HA590046, 40202ZM70A, and 10012196, delivering factory-spec performance for crossover and minivan applications with non-integral ABS sensor.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH01490 |
| Part Number | 513310 |
| Position | Front Axle |
| Outside Diameter | 139.86 mm (5.506 inch) |
| Inside Diameter | 68.00 mm (2.677 inch) |
| Flange Bolt Hole Quantity | 4 |
| Number of Bolt Holes | 5 |
| Design Type | Gen 3 (Roll-Form Design) |
| ABS Sensor | Non-Integral |
| Pre-Greased | Yes |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH01490
OE Numbers: 513310, HA590046, 40202ZM70A, 10012196
Reference Numbers (Interchange):
SKF: HA590046
Timken: HA590046
NTN: HUB334
Vehicle Fitment
Nissan: Murano 3.5L V6 (2003-2007)
Nissan: Quest 3.5L V6 (2004-2009)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Front axle wheel hub bearing engineered for Nissan Murano and Quest 3.5L V6 applications.
- Gen 3 roll-form design provides improved structural integrity and durability.
- Factory pre-greased and sealed – ready for installation out of the box.
- Non-integral ABS sensor design – retains original sensor or allows separate replacement.
- Direct OE cross-reference to HA590046, 40202ZM70A, and 10012196.
Installation Notes
- Confirm 139.86mm outside diameter, 68mm inside diameter, 5-stud pattern, and 4-bolt flange configuration match your original hub before installation.
- This hub uses a non-integral ABS sensor – retain and transfer your existing ABS sensor or purchase separately as needed.
- Inspect the steering knuckle bore for wear or damage prior to fitting the new hub.
- Clean all mounting surfaces thoroughly to prevent improper seating.
- Torque the hub retaining nut and wheel lug nuts to Nissan Murano/Quest factory specifications.
- Rotate the hub after installation to confirm smooth operation before road testing.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hubs to OE specifications. Contact us
