Wheel Hub 513272
The DUHUI Bearing 513272 front wheel hub is a direct OE-replacement assembly designed for Jeep Wrangler JK models from 2006 through 2009 with 3.8L V6 engine configurations. This front wheel hub bearing matches OE reference 513272 and features an integrated ABS sensor for full system compatibility.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH01461 |
| Part Number | 513272 |
| Position | Front Axle |
| Flange Diameter | 161.52 mm (6.359 inch) |
| Bolt Circle Diameter | 126.47 mm (4.979 inch) |
| Hub Pilot Diameter | 100.15 mm (3.943 inch) |
| Wheel Pilot Diameter | 71.37 mm (2.810 inch) |
| Brake Pilot Diameter | 70.99 mm (2.795 inch) |
| Hub Bolt Circle Diameter | 122.15 mm (4.809 inch) |
| Flange Offset | 48.56 mm (1.912 inch) |
| Bolt Size (Wheel Studs) | 1/2-20 |
| Bolt Size (Hub Mounting) | M12 x 1.75 |
| Wheel Stud Quantity | 5 |
| Mounting Bolt Holes | 4 |
| Spline Quantity | 32 |
| ABS Sensor | Integrated |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH01461
OE Numbers: 513272
Reference Numbers (Interchange):
SKF: BR930533
Timken: HA590843
NTN: HUB354
Vehicle Fitment
Jeep: Wrangler (JK) (2006 and later)
Jeep: Wrangler Rubicon V6 3.8L (2007-2009)
Jeep: Wrangler Sahara V6 3.8L (2007-2009)
Jeep: Wrangler Unlimited Rubicon V6 3.8L (2007-2009)
Jeep: Wrangler Unlimited Sahara V6 3.8L (2007-2009)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Front axle wheel hub bearing engineered for Jeep Wrangler JK off-road SUV applications.
- Integrated ABS sensor eliminates separate sensor purchase and installation.
- 5-stud configuration with 32-spline axle interface matches factory driveline specifications.
- 161.52mm flange diameter provides robust load capacity for off-road applications.
- Direct OE cross-reference to 513272 ensures accurate replacement.
Installation Notes
- Confirm 5-stud pattern, 126.47mm bolt circle, 161.52mm flange diameter, 32-spline count, and bolt sizes (1/2-20 wheel studs, M12 x 1.75 mounting bolts) match your original hub before installation.
- Verify vehicle model and year – this hub covers Jeep Wrangler JK (2006-2009, 3.8L V6).
- Inspect the steering knuckle bore for wear or damage prior to fitting the new hub.
- Clean all mounting surfaces thoroughly and verify ABS sensor connector compatibility.
- Torque the hub retaining nut and wheel lug nuts to Jeep Wrangler factory specifications.
- After installation, verify ABS sensor function with a diagnostic tool.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hubs to OE specifications. Contact us
