Wheel Hub 513307
The DUHUI Bearing 513307 front left wheel hub is a direct OE-replacement assembly designed for Nissan Murano crossover SUV models from 2009 through 2012 with the 3.5L V6 engine. This front left wheel hub bearing matches OE references SK513307, WA513307, NT513307, and 051859B, delivering factory-spec performance for crossover applications.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH1487 |
| Part Number | 513307 |
| Position | Front Axle, Left |
| Outer Diameter | 136.00 mm (5.354 inch) |
| Inner Diameter | 31.00 mm (1.220 inch) |
| Width | 87.00 mm (3.425 inch) |
| Number of Teeth | 32 |
| Input Shaft Teeth | 32 |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH1487
OE Numbers: 513307, SK513307, WA513307, NT513307, 051859B
Reference Numbers (Interchange):
SKF: BR930632
Timken: HA590846
NTN: HUB358
Vehicle Fitment
Nissan: Murano CrossCabriolet V6 3.5L (2011-2012)
Nissan: Murano LE V6 3.5L (2009-2012)
Nissan: Murano S V6 3.5L (2009-2012)
Nissan: Murano SL V6 3.5L (2009-2012)
Nissan: Murano SV V6 3.5L (2011-2012)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Front left wheel hub bearing engineered for Nissan Murano crossover SUV applications.
- 136mm outer diameter with 31mm inner diameter matches factory bearing dimensions.
- 87mm width with 32-tooth interface fits original hub and axle specifications.
- Direct OE cross-reference to SK513307, WA513307, NT513307, and 051859B.
- Factory-sealed bearing unit reduces contamination risk during service life.
Installation Notes
- Confirm this is a front left (driver side) application before installation.
- Verify outer diameter (136mm), inner diameter (31mm), width (87mm), and 32-tooth count match your original bearing.
- Inspect the steering knuckle bore for wear or damage prior to fitting the new hub.
- Clean all mounting surfaces thoroughly to prevent improper seating.
- Torque the hub retaining nut and wheel lug nuts to Nissan Murano factory specifications.
- Rotate the hub after installation to confirm smooth operation before road testing.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hubs to OE specifications. Contact us
