Wheel Hub 513306
The DUHUI Bearing 513306 front wheel hub is a direct OE-replacement assembly designed for Nissan Murano crossover SUV models from 2009 through 2012 with the 3.5L V6 engine. This front wheel hub bearing matches OE references 7500035, BR930745, 40202ZX70A, and HA590252, delivering factory-spec performance for crossover applications.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH1486 |
| Part Number | 513306 |
| Position | Front Axle |
| Flange Diameter | 137.16 mm (5.400 inch) |
| Bolt Circle Diameter | 119.38 mm (4.700 inch) |
| Brake Pilot Diameter | 68.58 mm (2.700 inch) |
| Flange Offset | 40.64 mm (1.600 inch) |
| Flange Bolt Hole Diameter | M12 x 1.25-6G |
| Flange Bolt Hole Quantity | 4 |
| Mounting Hole Quantity | 4 |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH1486
OE Numbers: 513306, 7500035, BR930745, 40202ZX70A, HA590252
Reference Numbers (Interchange):
SKF: BR930745
Timken: HA590252
NTN: HUB359
Vehicle Fitment
Nissan: Murano CrossCabriolet V6 3.5L (2011-2012)
Nissan: Murano LE V6 3.5L (2009-2012)
Nissan: Murano S V6 3.5L (2009-2012)
Nissan: Murano SL V6 3.5L (2009-2012)
Nissan: Murano SV V6 3.5L (2011-2012)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Front axle wheel hub bearing engineered for Nissan Murano crossover SUV applications.
- 137.16mm flange diameter with 119.38mm bolt circle provides proper load capacity.
- 4-bolt flange and 4-bolt mounting configuration matches factory specifications.
- M12 x 1.25-6G flange bolt size ensures proper hardware fitment.
- Direct OE cross-reference to 7500035, BR930745, 40202ZX70A, and HA590252.
Installation Notes
- Confirm flange diameter (137.16mm), bolt circle (119.38mm), 4-bolt flange, and M12 x 1.25-6G bolt size match your original hub before installation.
- Inspect the steering knuckle bore for wear or damage prior to fitting the new hub.
- Clean all mounting surfaces thoroughly to prevent improper seating.
- Torque the hub retaining nut and wheel lug nuts to Nissan Murano factory specifications.
- Rotate the hub after installation to confirm smooth operation before road testing.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hubs to OE specifications. Contact us
