Wheel Hub 513298
The DUHUI Bearing 513298 front wheel hub is a direct OE-replacement assembly designed for Nissan Sentra compact sedan models from 2007 through 2012 with 2.0L engine configurations. This front wheel hub bearing matches OE references 050725B, 400730L700, VKBA6996, and 10012190, and features an integrated ABS encoder for full system compatibility.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH1481 |
| Part Number | 513298 |
| Position | Front Axle |
| Bearing Type | Ball |
| Bolt Quantity | 4 |
| Bolt Circle Diameter B | 114.30 mm (4.500 inch) |
| Bolt Circle Diameter H | 103.00 mm (4.055 inch) |
| Brake Pilot Diameter | 68.00 mm (2.677 inch) |
| Bolt Size | M12 x 1.25 |
| ABS Type | Encoder |
| Driven/Non-Driven | Drive |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH1481
OE Numbers: 513298, 050725B, 400730L700, VKBA6996, 10012190
Reference Numbers (Interchange):
SKF: VKBA 6996
Timken: HA590848
NTN: HUB363
Vehicle Fitment
Nissan: Sentra Base L4 2.0L (2007-2011)
Nissan: Sentra Base L4 2.0L (2011-2012)
Nissan: Sentra S L4 2.0L (2007-2010)
Nissan: Sentra S L4 2.0L (2011-2012)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Front axle wheel hub bearing engineered for Nissan Sentra compact sedan applications.
- Integrated ABS encoder provides reliable wheel speed signal for ABS/ESC systems.
- Ball bearing design with 4-bolt configuration matches factory specifications.
- M12 x 1.25 wheel stud thread matches factory configuration.
- Direct OE cross-reference to 050725B, 400730L700, VKBA6996, and 10012190.
Installation Notes
- Confirm 4-bolt pattern, 114.30mm bolt circle, and M12 x 1.25 bolt size match your original hub before installation.
- This hub features an integrated ABS encoder – verify compatibility with your vehicle’s ABS system.
- Inspect the steering knuckle bore for wear or damage prior to fitting the new hub.
- Clean all mounting surfaces thoroughly and verify ABS encoder connector compatibility.
- Torque the hub retaining nut and wheel lug nuts to Nissan Sentra factory specifications.
- After installation, verify ABS function with a diagnostic tool.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hubs to OE specifications. Contact us
