Wheel Hub 513271
The DUHUI Bearing 513271 front wheel hub is a direct OE-replacement assembly designed for Chrysler Aspen and Dodge Durango models from 2006 through 2009. This front wheel hub bearing matches OE reference 513271 and features an integrated ABS sensor with 33-spline axle configuration for full system compatibility.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH1460 |
| Part Number | 513271 |
| Position | Front Axle |
| Flange Diameter | 183.01 mm (7.205 inch) |
| Bolt Circle Diameter | 139.67 mm (5.499 inch) |
| Wheel Pilot Diameter | 77.72 mm (3.060 inch) |
| Brake Pilot Diameter | 78.41 mm (3.087 inch) |
| Flange Offset | 48.69 mm (1.917 inch) |
| Hub Pilot Diameter | 105.36 mm (4.148 inch) |
| Hub Bolt Circle Diameter | 133.27 mm (5.247 inch) |
| Bolt Size | 9/16-18 |
| Wheel Stud Quantity | 5 |
| Mounting Bolt Hole Thread | M14 x 1.5 |
| Mounting Bolt Holes | 3 |
| ABS Sensor | Integrated |
| Number of Splines | 33 |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH1460
OE Numbers: 513271
Reference Numbers (Interchange):
SKF: BR930455
Timken: HA590254
NTN: WE61164
Vehicle Fitment
Chrysler: Aspen (2007-2009)
Dodge: Durango (2006-2009)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Front axle wheel hub bearing engineered for Chrysler Aspen and Dodge Durango 2006-2009 models.
- Integrated ABS sensor provides reliable wheel speed signal for brake system operation.
- 33-spline axle interface ensures proper engagement with the drive shaft.
- 5-stud configuration with 139.67 mm bolt circle matches factory wheel fitment.
- 183.01 mm flange diameter delivers robust load capacity for full-size SUV applications.
- M14 x 1.5 mounting bolt hole thread matches original equipment specification.
- Direct OE cross-reference to 513271 ensures accurate replacement.
Installation Notes
- Verify the 33-spline count matches your axle shaft before installation.
- Confirm 5-stud pattern with 139.67 mm bolt circle and 3-bolt M14 x 1.5 mounting configuration.
- Check the ABS sensor connector type and wiring condition prior to fitting.
- Clean the steering knuckle mounting surface and inspect for wear or damage.
- Torque the hub retaining nut and wheel lug nuts to Chrysler/Dodge factory specifications.
- After installation, test ABS function at low speed to confirm no warning light appears.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hubs to OE specifications. Contact us
