Wheel Hub 515010
The DUHUI Bearing 515010 front wheel hub is a direct OE-replacement assembly designed for Ford F-150 4WD models with 4-Wheel ABS from 1997 through 2000. This front wheel hub bearing matches OE references including 515010, 051900B, BR930318, and FW710T, and features an integrated ABS sensor with 33-spline axle configuration for full system compatibility.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH1506 |
| Part Number | 515010 |
| Position | Front Axle |
| Flange Diameter | 183.54 mm (7.226 inch) |
| Bolt Circle Diameter | 135.03 mm (5.316 inch) |
| Wheel Pilot Diameter | 86.74 mm (3.415 inch) |
| Brake Pilot Diameter | 89.97 mm (3.542 inch) |
| Flange Offset | 49.28 mm (1.940 inch) |
| Hub Pilot Diameter | 99.31 mm (3.910 inch) |
| Hub Bolt Circle Diameter | 125.88 mm (4.956 inch) |
| Wheel Stud Quantity | 5 |
| Mounting Bolt Hole Thread | M14 x 1.5 |
| Mounting Bolt Holes | 3 |
| Flange Shape | Triangular |
| ABS Sensor | Integrated |
| Number of Splines | 33 |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH1506
OE Numbers: 515010, 051900B, BR930318, FW710T
Reference Numbers (Interchange):
SKF: BR930318
Timken: HA590282
NTN: WE61058
Vehicle Fitment
Ford: F-150 4WD with 4-Wheel ABS (1997-1999), F-150 4WD with 4-Wheel ABS and 12mm Studs (2000)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Front axle wheel hub bearing engineered for Ford F-150 4WD 1997-2000 models with 4-Wheel ABS.
- Integrated ABS sensor delivers wheel speed signals for brake system operation.
- 33-spline axle interface ensures proper engagement with the drive shaft.
- 5-stud configuration with 135.03 mm bolt circle matches factory wheel fitment.
- Triangular 3-bolt M14 x 1.5 mounting pattern matches factory specification.
- Direct OE cross-reference to 515010, 051900B, BR930318, and FW710T ensures accurate replacement.
Installation Notes
- Verify the 33-spline count matches your axle shaft before installation.
- Confirm 5-stud pattern with 135.03 mm bolt circle and 3-bolt triangular M14 x 1.5 mounting configuration.
- Check the ABS sensor connector type and wiring condition prior to fitting.
- For 2000 models, confirm 12mm studs match your vehicle’s specification.
- Clean the steering knuckle mounting surface and inspect for wear or damage.
- Torque the hub retaining nut and wheel lug nuts to Ford factory specifications.
- After installation, test ABS function at low speed to confirm no warning light appears.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hubs to OE specifications. Contact us
