Wheel Hub 515009
The DUHUI Bearing 515009 front right wheel hub is a direct OE-replacement assembly designed for Dodge Dakota and Durango 4WD models with 4-Wheel ABS from 1997 through 2004. This front wheel hub bearing matches OE references including 515009, 52068964AE, BR930205, and 4110365, and features an integrated ABS sensor with 31-spline axle configuration for full system compatibility.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH1505 |
| Part Number | 515009 |
| Position | Front Axle, Right |
| Flange Diameter | 160.27 mm (6.310 inch) |
| Bolt Circle Diameter | 114.30 mm (4.500 inch) |
| Wheel Pilot Diameter | 71.37 mm (2.810 inch) |
| Brake Pilot Diameter | 73.41 mm (2.890 inch) |
| Flange Offset | 53.49 mm (2.106 inch) |
| Hub Pilot Diameter | 88.90 mm (3.500 inch) |
| Hub Bolt Circle Diameter | 124.46 mm (4.900 inch) |
| Bolt Size | M14 x 1.5 |
| Wheel Stud Quantity | 6 |
| Mounting Bolt Hole Thread | M14 x 1.5 |
| Mounting Bolt Holes | 3 |
| Flange Shape | Triangular |
| ABS Sensor | Integrated |
| Number of Splines | 31 |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH1505
OE Numbers: 515009, 52068964AE, BR930205, 4110365
Reference Numbers (Interchange):
SKF: BR930205
Timken: HA590153
NTN: WE61058
Vehicle Fitment
Dodge: Dakota 4WD with 4-Wheel ABS (1997-2004), Durango 4WD with 4-Wheel ABS (1998-2003)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Front right wheel hub bearing engineered for Dodge Dakota and Durango 4WD 1997-2004 models with 4-Wheel ABS.
- Integrated ABS sensor delivers wheel speed signals for brake system operation.
- 31-spline axle interface ensures proper engagement with the drive shaft.
- 6-stud configuration with 114.30 mm bolt circle provides enhanced load capacity.
- Triangular 3-bolt M14 x 1.5 mounting pattern matches factory specification.
- Direct OE cross-reference to 515009, 52068964AE, BR930205, and 4110365 ensures accurate replacement.
Installation Notes
- This hub is specified for right-side installation – confirm correct side before ordering.
- Verify the 31-spline count matches your axle shaft before installation.
- Confirm 6-stud pattern with 114.30 mm bolt circle and 3-bolt triangular M14 x 1.5 mounting configuration.
- Check the ABS sensor connector type and wiring condition prior to fitting.
- Clean the steering knuckle mounting surface and inspect for wear or damage.
- Torque the hub retaining nut and wheel lug nuts to Dodge factory specifications.
- After installation, test ABS function at low speed to confirm no warning light appears.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hubs to OE specifications. Contact us
