Wheel Hub 513268
The DUHUI Bearing 513268 front wheel hub is a direct OE-replacement assembly designed for Nissan 350Z and Infiniti G35 models from 2002 through 2009. This front wheel hub bearing matches OE references including 513268, 40202AL510, VKBA7560, HA590027, and BR930679, and features an integrated ABS sensor with 4-bolt mounting configuration for full system compatibility.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH1457 |
| Part Number | 513268 |
| Position | Front Axle |
| Flange Diameter | 135.99 mm (5.354 inch) |
| Bolt Circle Diameter | 114.30 mm (4.500 inch) |
| Wheel Pilot Diameter | 66.04 mm (2.600 inch) |
| Brake Pilot Diameter | 68.00 mm (2.677 inch) |
| Flange Offset | 40.74 mm (1.604 inch) |
| Hub Pilot Diameter | 84.00 mm (3.307 inch) |
| Hub Bolt Circle Diameter | 107.01 mm (4.213 inch) |
| Bolt Size | M12 x 1.25 |
| Wheel Stud Quantity | 5 |
| Mounting Bolt Hole Thread | M12 x 1.25 |
| Mounting Bolt Holes | 4 |
| ABS Sensor | Integrated |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH1457
OE Numbers: 513268, 40202AL510, VKBA7560, HA590027, BR930679
Reference Numbers (Interchange):
SKF: VKBA7560
Timken: HA590027
NTN: WE61058
Vehicle Fitment
Nissan: 350Z Coupe (Z33) 2002-2009, 350Z Convertible 2003-2009
Infiniti: G35 2003-2007
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Front axle wheel hub bearing engineered for Nissan 350Z and Infiniti G35 sports car applications.
- Integrated ABS sensor delivers wheel speed signals for brake system operation.
- 4-bolt M12 x 1.25 mounting configuration provides secure attachment to the steering knuckle.
- 5-stud pattern with 114.30 mm bolt circle matches factory wheel fitment.
- 135.99 mm flange diameter with 66.04 mm wheel pilot ensures precise hub-centric fitment.
- Direct OE cross-reference to 513268, 40202AL510, VKBA7560, HA590027, and BR930679 ensures accurate replacement.
Installation Notes
- Confirm 4-bolt mounting configuration with M12 x 1.25 threads matches your vehicle.
- Verify 5-stud pattern with 114.30 mm bolt circle before installation.
- Check the ABS sensor connector type and wiring condition prior to fitting.
- Clean the steering knuckle mounting surface and inspect for wear or damage.
- Torque the hub retaining nut and wheel lug nuts to Nissan/Infiniti factory specifications.
- After installation, test ABS function at low speed to confirm no warning light appears.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hubs to OE specifications. Contact us
