Wheel Hub 513266
The DUHUI Bearing 513266 front wheel hub is a direct OE-replacement assembly designed for Hyundai Santa Fe and Veracruz models from 2007 through 2009. This front wheel hub bearing matches OE references including 513266, 517503J000, and FW9266, and features a 5-stud configuration for non-ABS applications.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH1455 |
| Part Number | 513266 |
| Position | Front Axle |
| Flange Diameter | 139.70 mm (5.500 inch) |
| Bolt Circle Diameter | 114.30 mm (4.500 inch) |
| Wheel Pilot Diameter | 67.06 mm (2.640 inch) |
| Brake Pilot Diameter | 69.01 mm (2.717 inch) |
| Flange Offset | 53.39 mm (2.102 inch) |
| Hub Pilot Diameter | 91.95 mm (3.620 inch) |
| Hub Bolt Circle Diameter | 114.30 mm (4.500 inch) |
| Bolt Size | M12 x 1.5 |
| Wheel Stud Quantity | 5 |
| Mounting Bolt Hole Thread | M12 x 1.25 |
| ABS Sensor | Not Included |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH1455
OE Numbers: 513266, 517503J000, FW9266
Reference Numbers (Interchange):
SKF: BR930455
Timken: HA590153
NTN: WE61058
Vehicle Fitment
Hyundai: Santa Fe (2007-2009), Veracruz (2007-2009)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Front axle wheel hub bearing engineered for Hyundai Santa Fe and Veracruz SUV applications.
- 5-stud configuration with 114.30 mm bolt circle matches factory wheel fitment.
- 139.70 mm flange diameter with 67.06 mm wheel pilot provides precise hub-centric fitment.
- M12 x 1.5 stud and M12 x 1.25 mounting bolt specifications match original equipment.
- Designed for non-ABS applications – confirm your vehicle’s ABS configuration before ordering.
- Direct OE cross-reference to 513266, 517503J000, and FW9266 ensures accurate replacement.
Installation Notes
- Confirm 5-stud pattern with 114.30 mm bolt circle matches your vehicle.
- This hub does not include an ABS sensor – verify your vehicle uses a non-ABS system.
- Check M12 x 1.5 stud thread specification and M12 x 1.25 mounting bolt thread match your original hardware.
- Clean the steering knuckle mounting surface and inspect for wear or damage.
- Torque the hub retaining nut and wheel lug nuts to Hyundai factory specifications.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hubs to OE specifications. Contact us
