Wheel Hub 513226
The DUHUI Bearing 513226 front wheel hub is a direct OE-replacement assembly designed for Mini Cooper models across the R50, R52, and R56 generations from 2001 through 2013. This front wheel hub bearing matches OE references including 513226, VKBA3674, R162.50, 16796MI, and 713649350, and features an integrated ABS sensor with 26-spline axle configuration for full system compatibility.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH1428 |
| Part Number | 513226 |
| Position | Front Axle |
| Flange Diameter | 137.41 mm (5.410 inch) |
| Bolt Circle Diameter | 99.82 mm (3.930 inch) |
| Wheel Pilot Diameter | 55.88 mm (2.200 inch) |
| Brake Pilot Diameter | 64.01 mm (2.520 inch) |
| Flange Offset | 43.94 mm (1.730 inch) |
| Hub Pilot Diameter | 81.03 mm (3.190 inch) |
| Hub Bolt Circle Diameter | 101.85 mm (4.010 inch) |
| Bolt Size | M12 x 1.5 |
| Wheel Stud Quantity | 4 |
| Mounting Bolt Hole Thread | M10 x 1.5 |
| Mounting Bolt Holes | 4 |
| ABS Sensor | Integrated |
| Number of Splines | 26 |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH1428
OE Numbers: 513226, VKBA3674, R162.50, 16796MI, 713649350
Reference Numbers (Interchange):
SKF: VKBA3674
Timken: HA590153
NTN: WE61058
Vehicle Fitment
Mini: Cooper Hatchback (R50) 2001-2006, Mini (R56) 2005-2013, Cooper Convertible (R52) 2004-2007, Cooper 2002-2009
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Front axle wheel hub bearing engineered for Mini Cooper R50, R52, and R56 generation applications.
- Integrated ABS sensor delivers wheel speed signals for brake system operation.
- 26-spline axle interface ensures proper engagement with the drive shaft.
- 4-bolt M10 x 1.5 mounting configuration with matching 4-stud wheel pattern.
- M12 x 1.5 wheel stud specification matches original equipment.
- Precision-machined hub surface ensures proper rotor and wheel alignment.
- Direct OE cross-reference to 513226, VKBA3674, R162.50, 16796MI, and 713649350 ensures accurate replacement.
Installation Notes
- Verify the 26-spline count matches your axle shaft before installation.
- Confirm 4-bolt mounting configuration with M10 x 1.5 threads matches your vehicle.
- Check the ABS sensor connector type and wiring condition prior to fitting.
- Clean the steering knuckle mounting surface and inspect for wear or damage.
- Torque the hub retaining nut and wheel lug nuts to Mini factory specifications.
- After installation, test ABS function at low speed to confirm no warning light appears.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hubs to OE specifications. Contact us
