Wheel Hub 513224
The DUHUI Bearing 513224 front wheel hub is a direct OE-replacement assembly designed for Chrysler 300, Dodge Charger, Dodge Challenger, and Dodge Magnum RWD models from 2004 through 2010. This front wheel hub bearing matches OE references including 513224, 051170B, R18637, VKBA6717, and HA590030, and features an integrated ABS sensor for full system compatibility.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH1426 |
| Part Number | 513224 |
| Position | Front Axle |
| Flange Diameter | 149.86 mm (5.900 inch) |
| Bolt Circle Diameter | 114.30 mm (4.500 inch) |
| Wheel Pilot Diameter | 71.12 mm (2.800 inch) |
| Brake Pilot Diameter | 73.66 mm (2.900 inch) |
| Wheel Stud Quantity | 5 |
| ABS Sensor | Integrated |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH1426
OE Numbers: 513224, 051170B, R18637, VKBA6717, HA590030
Reference Numbers (Interchange):
SKF: VKBA6717
Timken: HA590030
NTN: WE61058
Vehicle Fitment
Chrysler: 300 2005-2009 RWD, 300C 2010+, 300C Sedan 2004+, 300C Station Wagon 2004-2010
Dodge: Challenger 2008-2009 RWD, Charger 2006-2009 RWD, Magnum 2005-2008 RWD
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Front axle wheel hub bearing engineered for Chrysler 300, Dodge Charger, Challenger, and Magnum RWD applications.
- Integrated ABS sensor delivers wheel speed signals for brake system operation.
- 5-stud pattern with 114.30 mm bolt circle matches factory wheel fitment.
- 149.86 mm flange diameter with 71.12 mm wheel pilot ensures precise hub-centric fitment.
- Direct OE cross-reference to 513224, 051170B, R18637, VKBA6717, and HA590030 ensures accurate replacement.
Installation Notes
- Confirm 5-stud pattern with 114.30 mm bolt circle matches your vehicle.
- This hub is specified for RWD (Rear-Wheel Drive) models – verify your vehicle’s drivetrain configuration.
- Check the ABS sensor connector type and wiring condition prior to fitting.
- Clean the steering knuckle mounting surface and inspect for wear or damage.
- Torque the hub retaining nut and wheel lug nuts to Chrysler/Dodge factory specifications.
- After installation, test ABS function at low speed to confirm no warning light appears.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hubs to OE specifications. Contact us
