Wheel Hub 513170
The DUHUI Bearing 513170 front wheel hub is a direct OE-replacement assembly designed for Volvo 740, 760, 780, and 940 models from 1981 through 1995. This front wheel hub bearing matches OE references including 513170 and BAF0026, and features an integrated ABS tone ring sensor with 4-stud configuration for full system compatibility.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH01379 |
| Part Number | 513170 |
| Position | Front Axle |
| Flange Diameter | 136.86 mm (5.388 inch) |
| Bolt Circle Diameter | 107.95 mm (4.250 inch) |
| Wheel Pilot Diameter | 65.02 mm (2.560 inch) |
| Brake Pilot Diameter | 67.95 mm (2.675 inch) |
| Bolt Size | M12 x 1.5 |
| Wheel Stud Quantity | 4 |
| ABS Sensor | Integrated Tone Ring Sensor |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH01379
OE Numbers: 513170, BAF0026
Reference Numbers (Interchange):
SKF: BR930455
Timken: HA590254
NTN: WE61164
Vehicle Fitment
Volvo: 740 Sedan (744) 1983-1992, 740 Station Wagon (745) 1984-1992, 760 Sedan (704,764) 1981-1992, 780 Coupe 1986-1990, 940 Sedan (944) 1990-1995
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Front axle wheel hub bearing engineered for Volvo 740, 760, 780, and 940 classic sedan, wagon, and coupe applications.
- Integrated ABS tone ring sensor provides wheel speed signals for brake system operation.
- 4-stud pattern with 107.95 mm bolt circle matches factory wheel fitment for these Volvo models.
- 136.86 mm flange diameter with 65.02 mm wheel pilot ensures precise hub-centric fitment.
- M12 x 1.5 wheel stud specification matches original equipment.
- Direct OE cross-reference to 513170 and BAF0026 ensures accurate replacement.
Installation Notes
- Confirm 4-stud pattern with 107.95 mm bolt circle matches your vehicle.
- This hub features an ABS tone ring sensor – verify your vehicle uses this ABS type.
- Check the ABS sensor connector type and wiring condition prior to fitting.
- Clean the steering knuckle mounting surface and inspect for wear or damage.
- Torque the hub retaining nut and wheel lug nuts to Volvo factory specifications.
- After installation, test ABS function at low speed to confirm no warning light appears.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hubs to OE specifications. Contact us
