Wheel Hub 513258
The DUHUI Bearing 513258 front wheel hub is a direct OE-replacement assembly designed for Toyota Auris, Avensis, Corolla, RAV4, and Verso models from 2005 through 2013. This front wheel hub bearing matches OE reference 513258 and features an integrated ABS sensor with 30-spline axle configuration and 4-bolt mounting for full system compatibility.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH1447 |
| Part Number | 513258 |
| Position | Front Axle |
| Flange Diameter | 138.86 mm (5.467 inch) |
| Bolt Circle Diameter | 114.30 mm (4.500 inch) |
| Wheel Pilot Diameter | 59.94 mm (2.360 inch) |
| Brake Pilot Diameter | 62.00 mm (2.441 inch) |
| Flange Offset | 47.47 mm (1.869 inch) |
| Hub Pilot Diameter | 89.99 mm (3.543 inch) |
| Hub Bolt Circle Diameter | 115.90 mm (4.563 inch) |
| Bolt Size | M12 x 1.5 |
| Wheel Stud Quantity | 5 |
| Mounting Bolt Hole Thread | M12 x 1.25 |
| Mounting Bolt Holes | 4 |
| ABS Sensor | Integrated |
| Number of Splines | 30 |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH1447
OE Numbers: 513258
Reference Numbers (Interchange):
SKF: BR930455
Timken: HA590153
NTN: WE61058
Vehicle Fitment
Toyota: Auris (_E15_) 2006-2012, Avensis Estate (_T27_) 2009+, Avensis Saloon (_T27_) 2008+, Corolla Saloon (_E15_) 2006+, RAV4 III SUV 2005-2013, RAV4 IV (_A4_) 2012+, Verso (_R2_) 2009+
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Front axle wheel hub bearing engineered for Toyota Auris, Avensis, Corolla, RAV4, and Verso applications across multiple platforms.
- Integrated ABS sensor delivers wheel speed signals for brake system operation.
- 30-spline axle interface ensures proper engagement with the drive shaft.
- 4-bolt M12 x 1.25 mounting configuration provides secure attachment to the steering knuckle.
- 5-stud pattern with 114.30 mm bolt circle matches factory wheel fitment.
- 138.86 mm flange diameter with 59.94 mm wheel pilot ensures precise hub-centric fitment.
- Direct OE replacement matching 513258 specification.
Installation Notes
- Verify the 30-spline count matches your axle shaft before installation.
- Confirm 4-bolt mounting configuration with M12 x 1.25 threads matches your vehicle.
- Check the ABS sensor connector type and wiring condition prior to fitting.
- Clean the steering knuckle mounting surface and inspect for wear or damage.
- Torque the hub retaining nut and wheel lug nuts to Toyota factory specifications.
- After installation, test ABS function at low speed to confirm no warning light appears.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hubs to OE specifications. Contact us
