Wheel Hub 513162
The DUHUI Bearing 513162 front wheel hub is a direct OE-replacement assembly designed for Toyota MR2 Spyder models from 2000 through 2005. This front wheel hub bearing matches OE references including 513162, 4355017010, FW9162, and BR930291, and features an integrated ABS sensor with 4-bolt mounting and 4-stud configuration for full system compatibility.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH01371 |
| Part Number | 513162 |
| Position | Front Axle |
| Flange Diameter | 124.99 mm (4.921 inch) |
| Bolt Circle Diameter | 100.00 mm (3.937 inch) |
| Wheel Pilot Diameter | 54.00 mm (2.126 inch) |
| Brake Pilot Diameter | 55.00 mm (2.165 inch) |
| Flange Offset | 55.88 mm (2.200 inch) |
| Hub Pilot Diameter | 66.04 mm (2.600 inch) |
| Hub Bolt Circle Diameter | 91.95 mm (3.620 inch) |
| Bolt Size | M10 x 1.25 |
| Wheel Stud Quantity | 4 |
| Mounting Bolt Hole Thread | M10 x 1.25 |
| Mounting Bolt Holes | 4 |
| Flange Shape | Modified Rectangle |
| ABS Sensor | Integrated |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH01371
OE Numbers: 513162, 4355017010, FW9162, BR930291
Reference Numbers (Interchange):
SKF: BR930291
Timken: HA590254
NTN: WE61164
Vehicle Fitment
Toyota: MR2 Spyder (2000-2005)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Front axle wheel hub bearing engineered for Toyota MR2 Spyder 2000-2005 mid-engine sports car applications.
- Integrated ABS sensor delivers wheel speed signals for brake system operation.
- 4-bolt M10 x 1.25 mounting configuration provides secure attachment to the steering knuckle.
- 4-stud pattern with 100.00 mm bolt circle matches factory wheel fitment.
- Modified rectangle flange shape matches Toyota original equipment design.
- 124.99 mm flange diameter with 54.00 mm wheel pilot ensures precise hub-centric fitment.
- Direct OE cross-reference to 513162, 4355017010, FW9162, and BR930291 ensures accurate replacement.
Installation Notes
- Confirm 4-bolt mounting configuration with M10 x 1.25 threads matches your vehicle.
- Verify 4-stud pattern with 100.00 mm bolt circle before installation.
- Check the ABS sensor connector type and wiring condition prior to fitting.
- Clean the steering knuckle mounting surface and inspect for wear or damage.
- Torque the hub retaining nut and wheel lug nuts to Toyota factory specifications.
- After installation, test ABS function at low speed to confirm no warning light appears.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hubs to OE specifications. Contact us
