Wheel Hub 512553
The DUHUI Bearing 512553 wheel hub is a direct OE-replacement assembly designed for Hyundai Sonata, Tucson, Veloster, and Kia Optima, Sportage, and Cadenza models. This rear wheel hub bearing matches OE references including 512553, 52730C1100, BR930925, and HA590614, and is engineered for rear axle applications on these platforms. It serves as a reliable OEM replacement wheel hub with integrated ABS sensor.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH1763 |
| Part Number | 512553 |
| Position | Rear Axle |
| Design Type | Gen 3 Hub Assembly |
| Bearing Style | Ball Bearing |
| Outside Diameter | 143.10 mm (5.634 inch) |
| Outside Diameter 1 | 80.90 mm (3.185 inch) |
| Outside Diameter 2 | 76.00 mm (2.992 inch) |
| Width 2 | 59.00 mm (2.323 inch) |
| Flange Diameter | 143.00 mm (5.630 inch) |
| Flange Offset | 58.90 mm (2.319 inch) |
| Bolt Circle Diameter | 114.30 mm (4.500 inch) |
| Brake Pilot Diameter | 76.10 mm (2.996 inch) |
| Hub Pilot Diameter | 80.90 mm (3.185 inch) |
| Wheel Pilot Diameter | 66.80 mm (2.630 inch) |
| Wheel Stud Quantity | 5 |
| Wheel Stud Size | M12 x 1.5 |
| Flange Bolt Hole Quantity | 4 |
| ABS Sensor | Integrated |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH1763
OE Numbers: 512553, 52730C1100, 713122810, BR930925, IJ113062
Reference Numbers (Interchange):
SKF: BR930925
Timken: HA590614
NTN: WE61822
MOOG: 512553
Mevotech: MB90312
BCA: WE61822
GMB: 730-0358
Vehicle Fitment
Hyundai: Sonata (2015-2019), Tucson (2016-2021), Veloster (2019-2022)
Kia: Optima (2016-2020), Sportage (2017-2021), Cadenza (2017-2020)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Generation 3 hub assembly combines the bearing, flange, and ABS sensor into one unit for simplified rear axle installation.
- Integrated ABS sensor with encoder ring provides wheel speed signal directly from the hub assembly.
- 143.00 mm flange diameter with 4-bolt flange pattern matches the original mounting configuration on Hyundai and Kia models.
- 5 wheel studs with M12 x 1.5 thread ensure proper wheel mounting and torque distribution.
- Pre-greased and sealed bearing unit requires no additional maintenance after installation.
- Cross-references to SKF, Timken, NTN, and MOOG part numbers ensure accurate replacement sourcing.
Installation Notes
- This hub is for rear axle applications on Hyundai Sonata, Tucson, Veloster, and Kia Optima, Sportage, and Cadenza models – verify position before ordering.
- Confirm the 5-stud flange pattern and 143.00 mm flange diameter match your vehicle mounting knuckle.
- Clean the axle spindle and mounting surface thoroughly before installation.
- Torque the axle nut to manufacturer specifications for the specific vehicle platform – do not use an impact wrench.
- Inspect the ABS sensor connector and wiring harness before plugging in the new unit.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hubs to OE specifications. Contact us
