Wheel Hub 512344
The DUHUI Bearing 512344 wheel hub is a direct OE-replacement assembly designed for Honda CR-V and Crosstour models from 2007 through 2012. This rear wheel hub bearing matches OE references including 512344, HA590190, BR930653, and 42200SWB951, and is engineered for rear axle applications on these SUV and crossover platforms. It serves as a reliable OEM replacement wheel hub with integrated ABS sensor.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH1236 |
| Part Number | 512344 |
| Position | Rear Axle |
| Design Type | Gen 3 Hub Assembly |
| Bearing Style | Ball Bearing |
| Flange Diameter | 151.80 mm (5.976 inch) |
| Flange Offset | 61.40 mm (2.417 inch) |
| Bolt Circle Diameter | 114.30 mm (4.500 inch) |
| Brake Pilot Diameter | 81.30 mm (3.201 inch) |
| Hub Pilot Diameter | 81.80 mm (3.220 inch) |
| Wheel Pilot Diameter | 64.00 mm (2.520 inch) |
| Hub Bolt Circle Diameter | 104.30 mm (4.106 inch) |
| Wheel Stud Quantity | 5 |
| Wheel Stud Size | M12 x 1.5 |
| Flange Bolt Hole Quantity | 4 |
| Flange Bolt Hole Size | M12 x 1.5 |
| Spline Quantity | 28 |
| ABS Sensor | Integrated |
| Pre-Greased | Yes |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH1236
OE Numbers: 512344, RW8344, HA590190, 42200SWB951, 712344, 42200-SWB-951, 42200-SWB-952, 42200-SXS-951, 42200-SWA-951
Reference Numbers (Interchange):
SKF: BR930653
Timken: HA590190
NTN: WE61601
MOOG: 512344
Mevotech: H512344
BCA: 512344
GMB: 725-3310
Optimal: 962501
Vehicle Fitment
Honda: CR-V (2007-2011), Crosstour (2010-2012)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Generation 3 hub assembly combines the bearing, flange, and ABS sensor into one unit for simplified rear axle installation.
- Integrated ABS sensor with magnetic encoder ring provides wheel speed signal directly from the hub assembly.
- 151.80 mm flange diameter with 4-bolt flange pattern matches the original mounting configuration on Honda CR-V and Crosstour models.
- 5 wheel studs with M12 x 1.5 thread ensure proper wheel mounting and torque distribution.
- Pre-greased and sealed bearing unit requires no additional maintenance after installation.
- Cross-references to SKF, Timken, NTN, and MOOG part numbers ensure accurate replacement sourcing.
Installation Notes
- This hub is for rear axle applications on Honda CR-V and Crosstour models – verify position before ordering.
- Confirm the 5-stud flange pattern and 151.80 mm flange diameter match your vehicle mounting knuckle.
- Clean the axle spindle and mounting surface thoroughly before installation.
- Torque the axle nut to Honda factory specifications for the CR-V and Crosstour – do not use an impact wrench.
- Inspect the ABS sensor connector and wiring harness before plugging in the new unit.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hubs to OE specifications. Contact us
