Wheel Hub 512323
The DUHUI Bearing 512323 wheel hub is a direct OE-replacement assembly designed for Honda Fit and Insight models from 2007 through 2010. This rear wheel hub bearing matches OE references including 512323, BR930613, and RW8323, and is engineered for rear axle applications on these compact platforms. It serves as a reliable OEM replacement wheel hub for non-ABS equipped vehicles.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH1218 |
| Part Number | 512323 |
| Position | Rear Axle |
| Design Type | Gen 3 Hub Assembly |
| Bearing Style | Ball Bearing |
| Flange Diameter | 138.90 mm (5.469 inch) |
| Flange Offset | 56.10 mm (2.209 inch) |
| Bolt Circle Diameter | 100.00 mm (3.937 inch) |
| Brake Pilot Diameter | 61.00 mm (2.402 inch) |
| Hub Pilot Diameter | 68.60 mm (2.701 inch) |
| Wheel Pilot Diameter | 56.00 mm (2.205 inch) |
| Wheel Stud Quantity | 4 |
| Wheel Stud Size | M12 x 1.5 |
| ABS Sensor | Non-Integrated |
| Pre-Greased | Yes |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH1218
OE Numbers: 512323, BR930613, RW8323, 42200-SAA-951, 42200-SAA-952, 42200-SAA-G51, 42200-SAB-951
Reference Numbers (Interchange):
SKF: BR930613
Timken: HA590126
NTN: WE60504
MOOG: 512323
Mevotech: H512323
BCA: 512323
GMB: 725-3070
Vehicle Fitment
Honda: Fit (2007-2009)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Hub assembly combines the bearing and flange into one unit for simplified rear axle installation.
- Non-integrated ABS design for vehicles without anti-lock braking system.
- 138.90 mm flange diameter with 4-bolt flange pattern matches the original mounting configuration on Honda Fit and Insight models.
- 4 wheel studs with M12 x 1.5 thread ensure proper wheel mounting and torque distribution.
- Pre-greased and sealed bearing unit requires no additional maintenance after installation.
- Cross-references to SKF, Timken, NTN, and MOOG part numbers ensure accurate replacement sourcing.
Installation Notes
- This hub is for rear axle applications on Honda Fit and Insight models without ABS – verify your brake configuration before ordering.
- Confirm the 4-stud flange pattern and 138.90 mm flange diameter match your vehicle mounting knuckle.
- Clean the axle spindle and mounting surface thoroughly before installation.
- Torque the axle nut to Honda factory specifications for the Fit and Insight – do not use an impact wrench.
- Inspect the wheel speed sensor wiring before installation if your vehicle is equipped with ABS.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hubs to OE specifications. Contact us
