Wheel Hub 512322
The DUHUI Bearing 512322 wheel hub is a direct OE-replacement assembly designed for Honda Civic Hybrid models from 2006 through 2008. This rear wheel hub bearing matches OE references including 512322, BR930629, and RW8322, and is engineered for rear axle applications on this sedan platform. It serves as a reliable OEM replacement wheel hub with integrated ABS sensor.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH1217 |
| Part Number | 512322 |
| Position | Rear Axle |
| Design Type | Gen 3 Hub Assembly |
| Bearing Style | Ball Bearing |
| Flange Diameter | 151.90 mm (5.980 inch) |
| Flange Offset | 58.40 mm (2.299 inch) |
| Bolt Circle Diameter | 114.30 mm (4.500 inch) |
| Brake Pilot Diameter | 64.00 mm (2.520 inch) |
| Hub Pilot Diameter | 69.90 mm (2.752 inch) |
| Wheel Pilot Diameter | 64.00 mm (2.520 inch) |
| Hub Bolt Circle Diameter | 99.80 mm (3.929 inch) |
| Wheel Stud Quantity | 5 |
| Wheel Stud Size | M12 x 1.5 |
| Flange Bolt Hole Quantity | 4 |
| Flange Bolt Hole Size | M10 x 1.25 |
| ABS Sensor | Integrated |
| Pre-Greased | Yes |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH1217
OE Numbers: 512322, RW8322, BR930629, 42200-SNC-951, 42200-SNC-952, 42200-SNB-951, 42200-SNA-951
Reference Numbers (Interchange):
SKF: BR930629
Timken: HA590208
NTN: WE61604
MOOG: 512322
Mevotech: H512322
BCA: 512322
GMB: 725-3230
Vehicle Fitment
Honda: Civic Hybrid (2006-2008)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Hub assembly combines the bearing, flange, and ABS sensor into one unit for simplified rear axle installation.
- Integrated ABS sensor with magnetic encoder ring provides wheel speed signal directly from the hub assembly.
- 151.90 mm flange diameter with 4-bolt flange pattern matches the original mounting configuration on Honda Civic Hybrid models.
- 5 wheel studs with M12 x 1.5 thread ensure proper wheel mounting and torque distribution.
- Pre-greased and sealed bearing unit requires no additional maintenance after installation.
- Cross-references to SKF, Timken, NTN, and MOOG part numbers ensure accurate replacement sourcing.
Installation Notes
- This hub is for rear axle applications on Honda Civic Hybrid models – verify position before ordering.
- Confirm the 5-stud flange pattern and 151.90 mm flange diameter match your vehicle mounting knuckle.
- Clean the axle spindle and mounting surface thoroughly before installation.
- Torque the axle nut to Honda factory specifications for the Civic Hybrid – do not use an impact wrench.
- Inspect the ABS sensor connector and wiring harness before plugging in the new unit.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hubs to OE specifications. Contact us
