Wheel Hub 512343
The DUHUI Bearing 512343 wheel hub is a direct OE-replacement assembly designed for Honda Odyssey, Acura RL, Isuzu Oasis, and Honda Shuttle models from 1994 through 2004. This rear wheel hub bearing matches OE references including 512343, BR930618, RW8343, and 42200SZ3951, and is engineered for rear axle applications on these platforms. It serves as a reliable OEM replacement wheel hub with integrated ABS sensor.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH1235 |
| Part Number | 512343 |
| Position | Rear Axle |
| Design Type | Gen 3 Hub Assembly |
| Bearing Style | Ball Bearing |
| Flange Diameter | 146.50 mm (5.768 inch) |
| Flange Offset | 61.90 mm (2.437 inch) |
| Bolt Circle Diameter | 116.00 mm (4.567 inch) |
| Brake Pilot Diameter | 70.10 mm (2.760 inch) |
| Hub Pilot Diameter | 73.00 mm (2.874 inch) |
| Wheel Pilot Diameter | 64.10 mm (2.524 inch) |
| Wheel Stud Quantity | 5 |
| Wheel Stud Size | M12 x 1.5 |
| Flange Bolt Hole Quantity | 4 |
| ABS Sensor | Integrated with Tone Ring |
| Pre-Greased | Yes |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH1235
OE Numbers: 512343, RW8343, BR930618, 42200SZ3951, HUB150-5, 42200-SZ3-951, 42200-SZ3-952, 42200-SZ3-953
Reference Numbers (Interchange):
SKF: BR930618
Timken: HA590040
NTN: HUB150-5
MOOG: 512343
Mevotech: H512343
BCA: 512343
GMB: 725-3030
Vehicle Fitment
Honda: Odyssey (1995-1998), Shuttle MPV (RA) (1994-2004), Mileage Sedan (KA9) (1996-2004)
Acura: RL (1996-2004)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Hub assembly combines the bearing, flange, and ABS sensor into one unit for simplified rear axle installation.
- Integrated tone ring ABS sensor provides wheel speed signal directly from the hub assembly.
- 146.50 mm flange diameter with 4-bolt flange pattern matches the original mounting configuration on Honda, Acura, and Isuzu models.
- 5 wheel studs with M12 x 1.5 thread ensure proper wheel mounting and torque distribution.
- Pre-greased and sealed bearing unit requires no additional maintenance after installation.
- Cross-references to SKF, Timken, NTN, and MOOG part numbers ensure accurate replacement sourcing.
Installation Notes
- This hub is for rear axle applications on Honda Odyssey, Acura RL, Isuzu Oasis, and Honda Shuttle models – verify position before ordering.
- Confirm the 5-stud flange pattern and 146.50 mm flange diameter match your vehicle mounting knuckle.
- Clean the axle spindle and mounting surface thoroughly before installation.
- Torque the axle nut to manufacturer specifications for the specific vehicle platform – do not use an impact wrench.
- Inspect the ABS sensor connector and wiring harness before plugging in the new unit.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hubs to OE specifications. Contact us
