Wheel Hub 512339
The DUHUI Bearing 512339 wheel hub is a direct OE-replacement assembly designed for Mitsubishi Lancer and Outlander models from 2000 through 2013. This rear wheel hub bearing matches OE references including 512339, BR930633, RW8339, and MR527453, and is engineered for rear axle applications on these sedan, wagon, and SUV platforms. It serves as a reliable OEM replacement wheel hub with integrated ABS sensor.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH1231 |
| Part Number | 512339 |
| Position | Rear Axle (Left, Right) |
| Design Type | Gen 3 Hub Assembly |
| Bearing Style | Ball Bearing |
| Flange Diameter | 137.50 mm (5.413 inch) |
| Bolt Circle Diameter | 114.30 mm (4.500 inch) |
| Brake Pilot Diameter | 90.00 mm (3.543 inch) |
| Wheel Pilot Diameter | 67.00 mm (2.638 inch) |
| Wheel Stud Quantity | 5 |
| Wheel Stud Size | M12 x 1.5 |
| Flange Bolt Hole Quantity | 4 |
| ABS Sensor | Integrated |
| Pre-Greased | Yes |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH1231
OE Numbers: 512339, RW8339, MR527453, VKBA6928, BR930633, MR527453, MR493319, 3785A007
Reference Numbers (Interchange):
SKF: BR930633
Timken: HA590131
NTN: WE60505
MOOG: 512339
Mevotech: H512339
BCA: 512339
GMB: 725-3150
Optimal: 962410
Vehicle Fitment
Mitsubishi: Lancer (2000-2013), Lancer Station Wagon (2003-2008), Outlander (2001-2008)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Generation 3 hub assembly combines the bearing, flange, and ABS sensor into one unit for simplified rear axle installation.
- Integrated ABS sensor with magnetic encoder ring provides wheel speed signal directly from the hub assembly.
- 137.50 mm flange diameter with 4-bolt flange pattern matches the original mounting configuration on Mitsubishi Lancer and Outlander models.
- 5 wheel studs with M12 x 1.5 thread ensure proper wheel mounting and torque distribution.
- Pre-greased and sealed bearing unit requires no additional maintenance after installation.
- Cross-references to SKF, Timken, NTN, and MOOG part numbers ensure accurate replacement sourcing.
Installation Notes
- This hub is for rear axle applications on Mitsubishi Lancer and Outlander models – verify position before ordering.
- Confirm the 5-stud flange pattern and 137.50 mm flange diameter match your vehicle mounting knuckle.
- Clean the axle spindle and mounting surface thoroughly before installation.
- Torque the axle nut to Mitsubishi factory specifications for the Lancer and Outlander – do not use an impact wrench.
- Inspect the ABS sensor connector and wiring harness before plugging in the new unit.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hubs to OE specifications. Contact us
