Wheel Hub 512313
The DUHUI Bearing 512313 wheel hub is a direct OE-replacement assembly designed for Ford Freestar and Mercury Monterey models from 2004 through 2007. This rear wheel hub bearing matches OE references including 512313, BR930490, and RW8313, and is engineered for rear axle applications on these minivan platforms. It serves as a reliable OEM replacement wheel hub with integrated ABS sensor.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH1210 |
| Part Number | 512313 |
| Position | Rear Axle (Right) |
| Bearing Generation | Gen 3 Hub Assembly |
| Bearing Style | Ball Bearing |
| Flange Diameter | 155.00 mm (6.102 inch) |
| Flange Offset | 61.00 mm (2.402 inch) |
| Bolt Circle Diameter | 114.30 mm (4.500 inch) |
| Brake Pilot Diameter | 63.50 mm (2.500 inch) |
| Hub Pilot Diameter | 73.70 mm (2.902 inch) |
| Wheel Pilot Diameter | 63.50 mm (2.500 inch) |
| Hub Bolt Circle Diameter | 106.70 mm (4.201 inch) |
| Wheel Stud Quantity | 5 |
| Wheel Stud Size | M12 x 1.5 |
| Flange Bolt Hole Quantity | 4 |
| ABS Sensor | Integrated |
| Pre-Greased | Yes |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH1210
OE Numbers: 512313, RW8313, BR930490, 3F2Z1104AA, 5F2Z1104A, 6F2Z1104A
Reference Numbers (Interchange):
SKF: BR930490
Timken: HA590122
NTN: WE60521
MOOG: 512313
Mevotech: H512313
BCA: 512313
GMB: 725-3100
Vehicle Fitment
Ford: Freestar (2004-2007)
Mercury: Monterey (2004-2007)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Generation 3 hub assembly combines the bearing, flange, and ABS sensor into one unit for simplified rear axle installation.
- Integrated ABS sensor with tone ring provides wheel speed signal directly from the hub assembly.
- 155.00 mm flange diameter with 4-bolt flange pattern matches the original mounting configuration on Ford Freestar and Mercury Monterey models.
- 5 wheel studs with M12 x 1.5 thread ensure proper wheel mounting and torque distribution.
- Pre-greased and sealed bearing unit requires no additional maintenance after installation.
- Cross-references to SKF, Timken, NTN, and MOOG part numbers ensure accurate replacement sourcing.
Installation Notes
- This hub is for rear right axle applications on Ford Freestar and Mercury Monterey models – verify position before ordering.
- Confirm the 5-stud flange pattern and 155.00 mm flange diameter match your vehicle mounting knuckle.
- Clean the axle spindle and mounting surface thoroughly before installation.
- Torque the axle nut to Ford factory specifications for the Freestar and Monterey – do not use an impact wrench.
- Inspect the ABS sensor connector and wiring harness before plugging in the new unit.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hubs to OE specifications. Contact us
