Wheel Hub 722020038
The DUHUI Bearing 722020038 wheel hub is a direct OE-replacement assembly designed for DR 1 models from 2010 through 2014. This rear wheel hub bearing matches OE references including 722020038, 44-20007, and KK-20007, and is engineered for rear axle applications on this compact platform. It serves as a reliable OEM replacement wheel hub with integrated ABS sensor.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH0581 |
| Part Number | 722020038 |
| Position | Rear Axle |
| Bearing Type | Gen 3 Hub Assembly |
| Inside Diameter | 28.00 mm (1.102 inch) |
| Outside Diameter | 78.00 mm (3.071 inch) |
| Structure Height | 70.00 mm (2.756 inch) |
| Distance Between Fixing Holes | 70.00 mm (2.756 inch) |
| Number of Holes | 4 |
| ABS Ring Number of Teeth | 43 |
| ABS Sensor | Integrated |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH0581
OE Numbers: 722020038, 44-20007, 408-25012K, KK-20007, 24DR003
Reference Numbers (Interchange):
ASHIKA: 44-20007
JAPANPARTS: KK-20007
JAPKO: 420007
RED-LINE: 24DR003
IAP QUALITY PARTS: 408-25012K
Vehicle Fitment
DR: DR 1 1.0 (2010-2014)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Generation 3 hub assembly combines the bearing, flange, and ABS sensor into one unit for simplified rear axle installation.
- Integrated ABS sensor with 43-tooth ring provides wheel speed signal directly from the hub assembly.
- 78.00 mm outer diameter and 28.00 mm inner diameter ensure proper fit on the DR 1 rear spindle.
- 4-hole fixing pattern with 70.00 mm distance between fixing holes matches the original mounting configuration.
- Pre-greased and sealed bearing unit requires no additional maintenance after installation.
- Cross-references to ASHIKA, JAPANPARTS, and IAP QUALITY PARTS part numbers ensure accurate replacement sourcing.
Installation Notes
- This hub is for rear axle applications on DR 1 models – verify position before ordering.
- Confirm the 4-hole fixing pattern and 70.00 mm distance between fixing holes match your vehicle mounting knuckle.
- Clean the axle spindle and mounting surface thoroughly before installation.
- Torque the hub retaining bolts to manufacturer specifications for the DR 1.
- Inspect the ABS sensor connector and wiring harness before plugging in the new unit.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hubs to OE specifications. Contact us
