Wheel Hub 512534
The DUHUI Bearing 512534 wheel hub is a direct OE-replacement assembly designed for Nissan Rogue, Rogue Sport, and Qashqai models from 2014 onward. This rear wheel hub bearing matches OE references including 512534, 43202-4BA0A, and HA590565, and is engineered for rear axle applications on these crossover SUV platforms. It serves as a reliable OEM replacement wheel hub with integrated ABS sensor.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH1737 |
| Part Number | 512534 |
| Position | Rear Axle (Left, Right) |
| Bearing Generation | Gen 3 Hub Assembly |
| Bearing Style | Ball Bearing |
| Outside Diameter | 147.80 mm (5.819 inch) |
| Outer Diameter 1 | 84.00 mm (3.307 inch) |
| Outer Diameter 2 | 67.90 mm (2.673 inch) |
| Width 2 | 69.00 mm (2.717 inch) |
| Flange Diameter | 148.00 mm (5.827 inch) |
| Flange Offset | 69.00 mm (2.717 inch) |
| Bolt Circle Diameter | 114.30 mm (4.500 inch) |
| Brake Pilot Diameter | 68.00 mm (2.677 inch) |
| Hub Pilot Diameter | 84.00 mm (3.307 inch) |
| Wheel Pilot Diameter | 66.00 mm (2.598 inch) |
| Wheel Stud Quantity | 5 |
| Wheel Stud Size | M12 x 1.25 |
| Flange Bolt Hole Quantity | 4 |
| Flange Shape | Modified Rectangular |
| ABS Sensor | Integrated |
| Pre-Greased | Yes |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH1737
OE Numbers: 512534, 43202-4BA0A, 432024BA0A, 1411556382, WE61795, 91556382, 7503160
Reference Numbers (Interchange):
SKF: BR930992
Timken: HA590565
MOOG: 512534
BCA: WE61795
Mevotech: MB30332
GMB: 750-3160
Dorman: 951-265
Vehicle Fitment
Nissan: Rogue (2014-2020), Rogue Sport (2017-2022), Qashqai (2017-2019)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Generation 3 hub assembly combines the bearing, flange, and ABS sensor into one unit for simplified rear axle installation.
- Integrated ABS sensor with encoder ring provides wheel speed signal directly from the hub assembly.
- 148.00 mm flange diameter with 4-bolt modified rectangular flange pattern matches the original mounting configuration on Nissan Rogue, Rogue Sport, and Qashqai models.
- 5 wheel studs with M12 x 1.25 thread ensure proper wheel mounting and torque distribution.
- Pre-greased and sealed bearing unit requires no additional maintenance after installation.
- Forged-steel construction provides the toughness and durability required for SUV applications.
Installation Notes
- This hub is for rear axle applications on Nissan Rogue, Rogue Sport, and Qashqai models – verify position before ordering.
- Confirm the 5-stud flange pattern and 148.00 mm flange diameter match your vehicle mounting knuckle.
- Clean the axle spindle and mounting surface thoroughly before installation.
- Torque the axle nut to Nissan factory specifications for the Rogue and Qashqai – do not use an impact wrench.
- Inspect the ABS sensor connector and wiring harness before plugging in the new unit.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hubs to OE specifications. Contact us
