Wheel Hub 512310
The DUHUI Bearing 512310 wheel hub is a direct OE-replacement assembly designed for Toyota Avalon, Camry, and Solara models from 1992 through 2004. This rear wheel hub bearing matches OE references including 512310, BR930370, RW8310, and 4245007010, and is engineered for rear axle applications on these sedan and coupe platforms. It serves as a reliable OEM replacement wheel hub with integrated ABS sensor for vehicles equipped with four-wheel ABS.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH1207 |
| Part Number | 512310 |
| Position | Rear Axle |
| Bearing Generation | Gen 3 Hub Assembly |
| Bearing Style | Ball Bearing |
| Flange Diameter | 152.40 mm (6.000 inch) |
| Flange Offset | 73.70 mm (2.902 inch) |
| Bolt Circle Diameter | 114.30 mm (4.500 inch) |
| Brake Pilot Diameter | 89.00 mm (3.504 inch) |
| Hub Pilot Diameter | 99.10 mm (3.902 inch) |
| Wheel Pilot Diameter | 61.00 mm (2.402 inch) |
| Hub Bolt Circle Diameter | 99.10 mm (3.902 inch) |
| Wheel Stud Quantity | 5 |
| Wheel Stud Size | M12 x 1.5 |
| Flange Bolt Hole Quantity | 4 |
| ABS Sensor | Integrated |
| Pre-Greased | Yes |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH1207
OE Numbers: 512310, RW8310, BR930370, 4245007010, HA590370, 42450-07010, 42450-06010, 42450-33010
Reference Numbers (Interchange):
SKF: BR930370
Timken: HA590370
NTN: WE60851
MOOG: 512310
Mevotech: H512310
BCA: 512310
GMB: 725-3040
Vehicle Fitment
Toyota: Avalon (2000-2004), Camry (1992-2001), Solara (1999-2003)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Generation 3 hub assembly combines the bearing, flange, and ABS sensor into one unit for simplified rear axle installation.
- Integrated ABS sensor provides wheel speed signal directly from the hub assembly for four-wheel ABS systems.
- 152.40 mm flange diameter with 4-bolt flange pattern matches the original mounting configuration on Toyota Avalon, Camry, and Solara models.
- 5 wheel studs with M12 x 1.5 thread ensure proper wheel mounting and torque distribution.
- Pre-greased and sealed bearing unit requires no additional maintenance after installation.
- Cross-references to SKF, Timken, NTN, and MOOG part numbers ensure accurate replacement sourcing.
Installation Notes
- This hub is for rear axle applications on Toyota Avalon, Camry, and Solara models with four-wheel ABS – verify your brake configuration before ordering.
- Confirm the 5-stud flange pattern and 152.40 mm flange diameter match your vehicle mounting knuckle.
- Clean the axle spindle and mounting surface thoroughly before installation.
- Torque the axle nut to Toyota factory specifications for the specific model – do not use an impact wrench.
- Inspect the ABS sensor connector and wiring harness before plugging in the new unit.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hubs to OE specifications. Contact us
