Wheel Hub 512276
The DUHUI Bearing 512276 wheel hub is a direct OE-replacement assembly designed for Mitsubishi Lancer models from 2002 through 2007. This rear wheel hub bearing matches OE references including 512276, BR930439, HA590104, and VKBA7404, and is engineered for rear axle applications on this compact sedan platform. It serves as a reliable OEM replacement wheel hub with integrated ABS sensor.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH1179 |
| Part Number | 512276 |
| Position | Rear Axle (Left, Right) |
| Design Type | Gen 3 (Roll-Form Design) |
| Inside Diameter | 30.00 mm (1.181 inch) |
| Outside Diameter | 123.20 mm (4.850 inch) |
| Flange Diameter | 123.00 mm (4.843 inch) |
| Flange Offset | 55.90 mm (2.201 inch) |
| Bolt Circle Diameter | 100.00 mm (3.937 inch) |
| Brake Pilot Diameter | 64.00 mm (2.520 inch) |
| Hub Pilot Diameter | 68.60 mm (2.701 inch) |
| Wheel Pilot Diameter | 56.00 mm (2.205 inch) |
| Wheel Stud Quantity | 4 |
| Wheel Stud Size | M12 x 1.5 |
| ABS Sensor | Non-Integrated |
| Pre-Greased | Yes |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH1179
OE Numbers: 512276, RW8276, BR930439, HA590104, VKBA7404, MR493619
Reference Numbers (Interchange):
SKF: BR930439
Timken: HA590104
NTN: WE61143
MOOG: 512276
Mevotech: H512276
BCA: WE61143
GMB: 799-0137
Vehicle Fitment
Mitsubishi: Lancer (2002-2007)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Generation 3 hub assembly with roll-form design provides consistent and optimal preload for rear axle applications.
- Non-integrated ABS design uses a tone ring, working with the existing wheel speed sensor on the vehicle.
- 123.20 mm outside diameter and 30.00 mm inside diameter ensure proper fit on the Mitsubishi Lancer rear spindle.
- 4 wheel studs with M12 x 1.5 thread ensure proper wheel mounting and torque distribution.
- Pre-greased and sealed bearing unit requires no additional maintenance after installation.
- Cross-references to SKF, Timken, NTN, MOOG, BCA, and GMB part numbers ensure accurate replacement sourcing.
Installation Notes
- This hub is for rear axle applications on Mitsubishi Lancer models – verify position before ordering.
- Confirm the 4-stud flange pattern and 123.20 mm outside diameter match your vehicle mounting knuckle.
- Clean the axle spindle and mounting surface thoroughly before installation.
- Torque the axle nut to Mitsubishi factory specifications for the Lancer – do not use an impact wrench.
- Inspect the ABS sensor and tone ring before installation, as this hub does not include an integrated sensor.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hubs to OE specifications. Contact us
