Wheel Hub 512267
The DUHUI Bearing 512267 wheel hub is a direct OE-replacement assembly designed for Hyundai Tucson and Kia Sportage FWD models from 2005 through 2009. This rear wheel hub bearing matches OE references including 512267, RW8267, 52710-2E110, and R184.49, and is engineered for rear axle applications on these compact SUV platforms. It serves as a reliable OEM replacement wheel hub with integrated ABS sensor.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH1171 |
| Part Number | 512267 |
| Position | Rear Axle (Left, Right) |
| Bearing Generation | Gen 3 Hub Assembly |
| Bearing Style | Ball Bearing |
| Flange Diameter | 139.70 mm (5.500 inch) |
| Flange Offset | 33.00 mm (1.299 inch) |
| Bolt Circle Diameter | 114.30 mm (4.500 inch) |
| Brake Pilot Diameter | 76.00 mm (2.992 inch) |
| Wheel Pilot Diameter | 66.00 mm (2.598 inch) |
| Wheel Stud Quantity | 5 |
| Wheel Stud Size | M12 x 1.5 |
| ABS Sensor | Integrated |
| Pre-Greased | Yes |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH1171
OE Numbers: 512267, RW8267, 52710-2E110, 527102E110, 9233005, R184.49, 52710-2E100, 52710-1F000
Reference Numbers (Interchange):
SKF: BR930496
Timken: HA590117
NTN: WE61135
MOOG: 512267
Mevotech: H512267
BCA: 512267
SNR: R184.49
Vehicle Fitment
Hyundai: Tucson (2005-2009) FWD
Kia: Sportage (2005-2009) FWD
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Generation 3 hub assembly combines the bearing, flange, and ABS sensor into one unit for simplified rear axle installation.
- Integrated ABS sensor provides wheel speed signal directly from the hub assembly.
- 139.70 mm flange diameter with 5-stud flange pattern matches the original mounting configuration on Hyundai Tucson and Kia Sportage FWD models.
- 5 wheel studs with M12 x 1.5 thread ensure proper wheel mounting and torque distribution.
- Pre-greased and sealed bearing unit requires no additional maintenance after installation.
- Cross-references to SKF, Timken, NTN, MOOG, and SNR part numbers ensure accurate replacement sourcing.
Installation Notes
- This hub is for rear axle applications on Hyundai Tucson and Kia Sportage FWD models – verify position and drive type before ordering.
- Confirm the 5-stud flange pattern and 139.70 mm flange diameter match your vehicle mounting knuckle.
- Clean the axle spindle and mounting surface thoroughly before installation.
- Torque the axle nut to manufacturer specifications for the specific vehicle platform – do not use an impact wrench.
- Inspect the ABS sensor connector and wiring harness before plugging in the new unit.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hubs to OE specifications. Contact us
