Wheel Hub 512370
The DUHUI Bearing 512370 wheel hub is a direct OE-replacement assembly designed for Toyota Yaris and Echo models from 1999 through 2014. This rear wheel hub bearing matches OE references including 512370, VKBA6828, and 424500D050, and is engineered for rear axle applications on these compact hatchback platforms. It serves as a reliable OEM replacement wheel hub with integrated ABS sensor.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH1256 |
| Part Number | 512370 |
| Position | Rear Axle (Left, Right) |
| Bearing Generation | Gen 3 Hub Assembly |
| Bearing Style | Ball Bearing |
| Flange Diameter | 138.00 mm (5.433 inch) |
| Flange Offset | 56.00 mm (2.205 inch) |
| Bolt Circle Diameter | 100.00 mm (3.937 inch) |
| Brake Pilot Diameter | 55.00 mm (2.165 inch) |
| Hub Pilot Diameter | 68.00 mm (2.677 inch) |
| Wheel Pilot Diameter | 54.00 mm (2.126 inch) |
| Wheel Stud Quantity | 4 |
| Wheel Stud Size | M12 x 1.5 |
| Flange Bolt Hole Quantity | 4 |
| ABS Sensor | Integrated |
| Pre-Greased | Yes |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH1256
OE Numbers: 512370, VKBA6828, 424500D050, 42450-0D050, 42450-52040, 42450-52041
Reference Numbers (Interchange):
SKF: VKBA6828
Timken: HA590271
NTN: WE60544
MOOG: 512370
Mevotech: H512370
BCA: 512370
GMB: 730-0297
Vehicle Fitment
Toyota: Yaris Hatchback (SCP1_, NLP1_, NCP1_) (1999-2005), Yaris Hatchback (CP10) (2005-2014), Echo (1999-2005)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Generation 3 hub assembly combines the bearing, flange, and ABS sensor into one unit for simplified rear axle installation.
- Integrated ABS sensor provides wheel speed signal directly from the hub assembly.
- 138.00 mm flange diameter with 4-stud flange pattern matches the original mounting configuration on Toyota Yaris and Echo models.
- 4 wheel studs with M12 x 1.5 thread ensure proper wheel mounting and torque distribution.
- Pre-greased and sealed bearing unit requires no additional maintenance after installation.
- Cross-references to SKF, Timken, NTN, MOOG, and GMB part numbers ensure accurate replacement sourcing.
Installation Notes
- This hub is for rear axle applications on Toyota Yaris and Echo models – verify position before ordering.
- Confirm the 4-stud flange pattern and 138.00 mm flange diameter match your vehicle mounting knuckle.
- Clean the axle spindle and mounting surface thoroughly before installation.
- Torque the axle nut to Toyota factory specifications for the Yaris and Echo – do not use an impact wrench.
- Inspect the ABS sensor connector and wiring harness before plugging in the new unit.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hubs to OE specifications. Contact us
