Wheel Hub 512217
The DUHUI Bearing 512217 wheel hub is a direct OE-replacement assembly designed for Toyota Corolla, Matrix, and Pontiac Vibe models from 2003 through 2008. This rear wheel hub bearing matches OE references including 512217, RW8217, and 42450-02070, and is engineered for rear axle applications on these sedan, hatchback, and wagon platforms. It serves as a reliable OEM replacement wheel hub with integrated ABS sensor.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH1125 |
| Part Number | 512217 |
| Position | Rear Axle (Left, Right) |
| Bearing Generation | Gen 3 Hub Assembly |
| Bearing Style | Ball Bearing |
| Flange Diameter | 134.60 mm (5.299 inch) |
| Flange Offset | 53.30 mm (2.098 inch) |
| Bolt Circle Diameter | 99.00 mm (3.898 inch) |
| Brake Pilot Diameter | 55.90 mm (2.201 inch) |
| Hub Pilot Diameter | 73.90 mm (2.909 inch) |
| Wheel Pilot Diameter | 53.30 mm (2.098 inch) |
| Hub Bolt Circle Diameter | 94.00 mm (3.701 inch) |
| Wheel Stud Quantity | 5 |
| Wheel Stud Size | M12 x 1.5 |
| Flange Bolt Hole Quantity | 4 |
| ABS Sensor | Integrated |
| Pre-Greased | Yes |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH1125
OE Numbers: 512217, RW8217, 42450-02070, 42450-02071, 42450-02072, 42450-02080
Reference Numbers (Interchange):
SKF: BR930617
Timken: HA590147
NTN: WE60733
MOOG: 512217
Mevotech: H512217
BCA: 512217
GMB: 730-0117
Vehicle Fitment
Toyota: Corolla (2003-2008), Matrix (2003-2008)
Pontiac: Vibe (2003-2008)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Generation 3 hub assembly combines the bearing, flange, and ABS sensor into one unit for simplified rear axle installation.
- Integrated ABS sensor with tone ring provides wheel speed signal directly from the hub assembly.
- 134.60 mm flange diameter with 4-bolt flange pattern matches the original mounting configuration on Toyota Corolla, Matrix, and Pontiac Vibe models.
- 5 wheel studs with M12 x 1.5 thread ensure proper wheel mounting and torque distribution.
- Pre-greased and sealed bearing unit requires no additional maintenance after installation.
- Cross-references to SKF, Timken, NTN, MOOG, and BCA part numbers ensure accurate replacement sourcing.
Installation Notes
- This hub is for rear axle applications on Toyota Corolla, Matrix, and Pontiac Vibe models – verify position before ordering.
- Confirm the 5-stud flange pattern and 134.60 mm flange diameter match your vehicle mounting knuckle.
- Clean the axle spindle and mounting surface thoroughly before installation.
- Torque the axle nut to manufacturer specifications for the specific vehicle platform – do not use an impact wrench.
- Inspect the ABS sensor connector and wiring harness before plugging in the new unit.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hubs to OE specifications. Contact us
