Wheel Hub 512215
The DUHUI Bearing 512215 wheel hub is a direct OE-replacement assembly designed for Toyota Corolla, Matrix, and Pontiac Vibe models from 2003 through 2008. This rear wheel hub bearing matches OE references including 512215, BR930324, and RW8215, and is engineered for rear axle applications on these sedan, hatchback, and wagon platforms. It serves as a reliable OEM replacement wheel hub with integrated ABS sensor.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH1123 |
| Part Number | 512215 |
| Position | Rear Axle (Left, Right) |
| Bearing Generation | Gen 3 Hub Assembly |
| Bearing Style | Ball Bearing |
| Flange Diameter | 134.60 mm (5.299 inch) |
| Flange Offset | 53.30 mm (2.098 inch) |
| Bolt Circle Diameter | 99.00 mm (3.898 inch) |
| Brake Pilot Diameter | 55.90 mm (2.201 inch) |
| Hub Pilot Diameter | 73.90 mm (2.909 inch) |
| Wheel Pilot Diameter | 53.30 mm (2.098 inch) |
| Hub Bolt Circle Diameter | 94.00 mm (3.701 inch) |
| Wheel Stud Quantity | 5 |
| Wheel Stud Size | M12 x 1.5 |
| Flange Bolt Hole Quantity | 4 |
| ABS Sensor | Integrated |
| Pre-Greased | Yes |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH1123
OE Numbers: 512215, RW8215, BR930324, 42450-02070, 42450-02080, 42450-02100, 4245002070
Reference Numbers (Interchange):
SKF: BR930324
Timken: HA590145
NTN: WE60731
MOOG: 512215
Mevotech: H512215
BCA: 512215
GMB: 730-0115
Vehicle Fitment
Toyota: Corolla (2003-2008), Matrix (2003-2008)
Pontiac: Vibe (2003-2008)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Generation 3 hub assembly combines the bearing, flange, and ABS sensor into one unit for simplified rear axle installation.
- Integrated ABS sensor with tone ring provides wheel speed signal directly from the hub assembly.
- 134.60 mm flange diameter with 4-bolt flange pattern matches the original mounting configuration on Toyota Corolla, Matrix, and Pontiac Vibe models.
- 5 wheel studs with M12 x 1.5 thread ensure proper wheel mounting and torque distribution.
- Pre-greased and sealed bearing unit requires no additional maintenance after installation.
- Cross-references to SKF, Timken, NTN, MOOG, and BCA part numbers ensure accurate replacement sourcing.
Installation Notes
- This hub is for rear axle applications on Toyota Corolla, Matrix, and Pontiac Vibe models – verify position before ordering.
- Confirm the 5-stud flange pattern and 134.60 mm flange diameter match your vehicle mounting knuckle.
- Clean the axle spindle and mounting surface thoroughly before installation.
- Torque the axle nut to manufacturer specifications for the specific vehicle platform – do not use an impact wrench.
- Inspect the ABS sensor connector and wiring harness before plugging in the new unit.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hubs to OE specifications. Contact us
