Wheel Hub 512336
The DUHUI Bearing 512336 wheel hub is a direct OE-replacement assembly designed for Volkswagen Golf V, Audi A3, and SEAT Altea models from 2003 through 2015. This rear wheel hub bearing matches OE references including 512336, VKBA3656, and RW8336, and is engineered for rear axle applications on these MQB and PQ35 platform vehicles. It serves as a reliable OEM replacement wheel hub with integrated ABS sensor.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH1228 |
| Part Number | 512336 |
| Position | Rear Axle (Left, Right) |
| Bearing Generation | Gen 3 Hub Assembly |
| Bearing Style | Ball Bearing |
| Flange Diameter | 135.90 mm (5.350 inch) |
| Bolt Circle Diameter | 111.80 mm (4.402 inch) |
| Wheel Stud Quantity | 5 |
| Wheel Stud Size | M14 x 1.5 |
| ABS Sensor | Integrated |
| Pre-Greased | Yes |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH1228
OE Numbers: 512336, VKBA3656, RW8336, 1K0-598-611, 1K0-598-611A, 1K0-598-611B, 1K0-598-611D, 5K0-598-611
Reference Numbers (Interchange):
SKF: VKBA3656
FAG: 713610610
SNR: R154.44
Optimal: 102001
Febi Bilstein: 28350
MOOG: VO-WB-11040
Meyle: 100 650 0012
Vehicle Fitment
Volkswagen: Golf V Hatchback (5M1) (2004-2013), Golf V Hatchback (1K1) (2003-2009)
Audi: A3 Hatchback (8P1) (2003-2013), A3 Hatchback (8PA) (2004-2015)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Generation 3 hub assembly combines the bearing, flange, and ABS sensor into one unit for simplified rear axle installation.
- Integrated ABS sensor provides wheel speed signal directly from the hub assembly.
- 135.90 mm flange diameter with 5-stud flange pattern matches the original mounting configuration on Volkswagen Golf V, Audi A3, and SEAT Altea models.
- 5 wheel studs with M14 x 1.5 thread ensure proper wheel mounting and torque distribution.
- Pre-greased and sealed bearing unit requires no additional maintenance after installation.
- Cross-references to SKF, FAG, SNR, Optimal, and Febi Bilstein part numbers ensure accurate replacement sourcing.
Installation Notes
- This hub is for rear axle applications on Volkswagen Golf V, Audi A3, and SEAT Altea models – verify position before ordering.
- Confirm the 5-stud flange pattern and 135.90 mm flange diameter match your vehicle mounting knuckle.
- Clean the axle spindle and mounting surface thoroughly before installation.
- Torque the axle nut to manufacturer specifications for the specific vehicle platform – do not use an impact wrench.
- Inspect the ABS sensor connector and wiring harness before plugging in the new unit.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hubs to OE specifications. Contact us
